Description | Àmųmà Plus 1.5KVA (12V)
Model name – GA1512A
Capacity (VA) – 1500VA
Input Voltage (DC) – 12V
Nominal Voltage – 220VAC
Voltage Range – 154-265VAC (AC Model); 185-264VAC±3V(UPS Model)
Frequency 50/60Hz (Auto sensing)
Power Factor – 0.8 | Àmųmà Plus 10KVA (48V)
• Support Lithium battery
• Support RS232 for WIFI (optional)
• Pure Sine Wave output
• Powerful Charge Rate Up to 90AMP
• DC Start & Automatic Self-Diagnostic Function
• High Efficiency Design & “Power Saving Mode” to Conserve Energy
• Auto restart when AC in recovering
• Smart battery charger design for optimized battery performance
• Selectable charging current based on applications
• AC input/DC input/Solar input optional priority
• Built-in Transformer
• Wall-Mounted | Delta 8 Hybrid
• Operation Type: Off-Grid/On-Grid
• Sine wave Type: Pure, Power Factor 1.0
• Dual AC output for smart load management
• Battery Independent Design
• Wide PV input voltage range (90-450VDC)
• Built-in WiFi with IOS & Android APP
• Supports USB on the go function
• RGB Lightning for different working modes (Battery, Solar, Utility)
• With Parallel kits support up to 6 units | Solar Charge Controller (60A)
- Model: MPPT 60A
- Max. Charge Current 60A
- System Voltage: 12v/24v/36v/48v
| Àmųmà Plus 6KVA (24V)
- Model name – GA6024A
- Capacity (VA) – 6000VA
- Input Voltage (DC) – 24V
- Nominal Voltage – 220VAC
- Voltage Range – 154-265VAC (AC Model); 185-264VAC±3V(UPS Model)
- Frequency 50/60Hz (Auto sensing)
- Power Factor – 0.8
| SOLAR CHARGE CONTROLLER (100A)
- Model: MPPT 100A
- Max. Charge Current:100A
- System Voltage:12v/24v/36v/48v
|
Content | Àmųmà Plus 1.5KVA (12V)
• Support Lithium battery
• Support RS232 for WIFI (optional)
• Pure Sine Wave output
• Powerful Charge Rate Up to 90AMP
• DC Start & Automatic Self-Diagnostic Function
• High Efficiency Design & “Power Saving Mode” to Conserve Energy
• Auto restart when AC in recovering
• Smart battery charger design for optimized battery performance
• Selectable charging current based on applications
• AC input/DC input/Solar input optional priority
• Built-in Transformer
• Wall-Mounted
DESCRIPTION
SPECIFICATIONS
Model name – GA1512A
Capacity (VA) – 1500VA
Input Voltage (DC) – 12V
Nominal Voltage – 220VAC
Voltage Range – 154-265VAC (AC Model); 185-264VAC±3V(UPS Model)
Frequency 50/60Hz (Auto sensing)
Power Factor – 0.8
Rated Power 1200W
Voltage 220VAC
Frequency 50/60Hz
Waveform Pure Sinewave
Transfer time (AC to DC) <8ms
Transfer time (DC to AC) <8ms
Output Voltage Regulation ±10%
Bypass Mode Yes
Save mode Yes
Efficiency >98%
Input protection Circuit breaker
Output protection Circuit breaker
Battery Type AGM- Deep Cycle, Gel Up to 500Ah
Charging current 30A
Low Level disconnect (Selectable) 10V or 10.5V
PWM (Optional) Controller Voltage 15VDC - 30VDC
MPPT (Optional) Controller Voltage 15VDC - 30VDC
Maximum PV Array Power 400W
Maximum PV Array Open circuit Voltage PWM: 50VDC
Maximum Solar Charge current 30A
Protections Over load, Over temp, Ove charging, Battery low, Battery reverse connect, High AC voltage etc
LCD Indicator Status AC Input Voltage, AC Input Frequency, PV Voltage, PV Current
Output Voltage, Output Frequency, Battery Voltage, Load current etc.
LED Indicator Status AC Line in: Green / Inverter: Green / Charging: Yellow / Alarm: Red
Low battery alarm Audible alarm -5 sounds beeping
Overload alarm Audible alarm-continuous beeping
Fault Audible alarm-continuous beeping
Temperature 0 – 40°C
Humidity -10°C-90°C Non Condensing
Accoustic Noise (db) >55dB
Size L*W*H (mm) 325*263*123MM
Weight | Àmųmà Plus 10KVA (48V)
Specification Of Àmųmà Plus 10KVA (48V)
Model name – GA10048A
Capacity (VA) – 10000VA
Input Voltage (DC) – 48V
Nominal Voltage – 220VAC
Voltage Range – 154-265VAC (AC Model); 185-264VAC±3V(UPS Model)
Frequency - 50/60Hz (Auto sensing)
Power Factor – 0.8
Rated Power: 8000W
Voltage: 220VAC
Frequency: 50/60Hz
Waveform: Pure SineWave
Transfer time (AC to DC): <8ms
Transfer time (DC to AC): <8ms
Output Voltage Regulation: ±10%
Bypass Mode: Yes
Save mode: Yes
Efficiency: >98%
Input protection: Circuit breaker
Output protection: Circuit breaker
Battery Type: AGM- Deep Cycle, Gel Up to 500Ah
Charging current: 42A
Low Level disconnect (Selectable): 40V or 42V
PWM (Optional) Controller Voltage: 30VDC – 60VDC
MPPT (Optional) Controller Voltage: 30VDC – 150VDC
Maximum PV Array Power: 3200W
Maximum PV Array Open circuit Voltage: MPPT:150VDC
Maximum Solar Charge current: 100A
Protections: Over load, Over temp, Over charging, Battery low, Battery reverse connect, High AC voltage etc
LCD Indicator Status: AC Input Voltage, AC Input Frequency, PV Voltage, PV Current
Output Voltage, Output Frequency, Battery Voltage, Load current etc.
LED Indicator Status: AC Line in: Green / Inverter: Green / Charging: Yellow / Alarm: Red
Low battery alarm: Audible alarm -5 seconds beeping
Overload alarm: Audible alarm-continuous beeping
Fault: Audible alarm-continuous beeping
Temperature: 0 – 40°C
Humidity -10°C-90°C Non Condensing
Accoustic Noise (db): >55dB
Size L*W*H (mm): 470*335*210MM
Weight: 40
| Delta 8.2 Hybrid
Technical features
MODEL Name - Delta 8.2
Model Number - ONY-I-D8.2-48
Rated Power - 8200VA/8200W
PARALLEL CAPABILITY - Yes, up to 6 units
Delta 8 Hybrid
• Operation Type: Off-Grid/On-Grid
• Sine wave Type: Pure, Power Factor 1.0
• Dual AC output for smart load management
• Battery Independent Design
• Wide PV input voltage range (90-450VDC)
• Built-in WiFi with IOS & Android APP
• Supports USB on the go function
• RGB Lightning for different working modes (Battery, Solar, Utility)
• With Parallel kits support up to 6 units
INPUT
Voltage - 230 VAC
Selectable Voltage Range - 170-280 VAC (For Personal Computers)/90-280 VAC (For Home Appliances)
Frequency Range - 50 Hz/60 Hz (Auto sensing)
OUTPUT
AC Voltage Regulation (Batt.Mode) - 230VAC+/-5%
Surge Power - 16400VA
Efficiency (Peak) - 90% ~ 93%
Transfer Time - 15 ms (For Personal Computers) ; 20 ms (For Home Appliances)
Waveform - Pure sine wave
No Load Power Consumption - <70wW
DC Voltage (Optional) - 12 VDC +/- 5%,100W
BATTERY
Battery Voltage - 48 VDC
Floating Charge Voltage - 54 VDC
Overcharge Protection - 66 VDC
SOLAR CHARGER & AC CHARGER of Delta 8.2 Hybrid
Solar Charger Type – MPPT
Maximum PV Array Power – 8200W (4100W x 2)
MPPT Range @ Operating Voltage – 90 ~ 450 VDC
Maximum PV Array Open Circuit Voltage – 500 VDC
Maxmum Solar Charge Current – 120 A
Maximum AC Charge Current – 120 A
Maximum Charge Current – 120 A
PHYSICAL
Dimension, D x W x H (mm) – 147.4 x 432.5 x 553.6
Net Weight (kgs) – 18.4
Communication Interface – USB/RS232/RS485/WiFi/Dry-contact
OPERATING ENVIRONMENT
Humidity: 5% to 95% to Relative Humidity (Non-Condensing)
Operating Temperature – 10°C to 50°C
Storage Temperature – 15°C to 60°C
Compliance Safety – CE
| Solar Charge Controller (60A)
Model: MPPT 60A
Max. Charge Current 60A
System Voltage: 12v/24v/36v/48v
Flexible
Max. PV Voltage (VoC): 150Vdc
Solar Operating Voltage: 20-150Vdc @12V
36-150Vdc @24v
48-150Vdc @36v
64-150Vdc @48v
PV Input Power: 12v: 800w
24v: 1600w
36v: 2400w
48v: 3200w
Operation Temperature -25~60°C | Àmųmà Plus 6KVA (24V)
• Support Lithium battery
• Support RS232 for WIFI (optional)
• Pure Sine Wave output
• Powerful Charge Rate Up to 90AMP
• DC Start & Automatic Self-Diagnostic Function
• High Efficiency Design & “Power Saving Mode” to Conserve Energy
• Auto restart when AC in recovering
• Smart battery charger design for optimized battery performance
• Selectable charging current based on applications
• AC input/DC input/Solar input optional priority
• Built-in Transformer
• Wall-Mounted
DESCRIPTION
Specification Of Àmųmà Plus 6KVA (24V)
Model name – GA6024A
Capacity (VA) – 6000VA
Input Voltage (DC) – 24V
Nominal Voltage – 220VAC
Voltage Range – 154-265VAC (AC Model); 185-264VAC±3V(UPS Model)
Frequency 50/60Hz (Auto sensing)
Power Factor – 0.8
Rated Power 4800W
Voltage 220VAC
Frequency 50/60Hz
Waveform Pure Sinewave
Transfer time (AC to DC) <8ms
Transfer time (DC to AC) <8ms
Output Voltage Regulation ±10%
Bypass Mode Yes
Save mode Yes
Efficiency >98%
Input protection Circuit breaker
Output protection Circuit breaker
Battery Type AGM- Deep Cycle, Gel Up to 500Ah
Charging current 60A
Low Level disconnect (Selectable) 20V or 21V
PWM (Optional) Controller Voltage 30VDC - 60VDC
MPPT (Optional) Controller Voltage 30VDC - 60VDC
Maximum PV Array Power 1600W
Maximum PV Array Open circuit Voltage PWM: 150VDC, MPPT:150VDC
Maximum Solar Charge current 100A
Protections Over load, Over temp, Over charging, Battery low, Battery reverse connect, High AC voltage etc
LCD Indicator Status AC Input Voltage, AC Input Frequency, PV Voltage, PV Current
Output Voltage, Output Frequency, Battery Voltage, Load current etc.
LED Indicator Status AC Line in: Green / Inverter: Green / Charging: Yellow / Alarm: Red
Low battery alarm Audible alarm -5 sounds beeping
Overload alarm Audible alarm-continuous beeping
Fault Audible alarm-continuous beeping
Temperature 0 – 40°C
Humidity -10°C-90°C Non Condensing
Accoustic Noise (db) >55dB
Size L*W*H (mm) 470*335*210MM
Weight 29 | SOLAR CHARGE CONTROLLER (100A)
Model: MPPT 100A
Max. Charge Current:100A
System Voltage:12v/24v/36v/48v
Flexible
Max. PV Voltage (VoC):150Vdc
Solar Operating Voltage: 20-150Vdc @12V
36-150Vdc @24v
48-150Vdc @36v
64-150Vdc @48v
PV Input Power:12v: 1040w
24v: 2600w
36v: 3900w
48v: 5200w
Operation Temperature-25~60°C |
Reviews
There are no reviews yet.