Quality Àmųmà Plus 3KVA (24V) Off Grid Solar Inverter

Àmųmà Plus 3KVA (24V)

Model name – GA3024A
Capacity (VA) – 3000VA
Input Voltage (DC) – 24V
Nominal Voltage – 220VAC
Voltage Range – 154-265VAC (AC Model); 185-264VAC±3V(UPS Model)
Frequency 50/60Hz (Auto sensing)
Power Factor – 0.8

Àmųmà Plus 3KVA (24V)

• Support Lithium battery
• Support RS232 for WIFI (optional)
• Pure Sine Wave output
• Powerful Charge Rate Up to 90AMP
• DC Start & Automatic Self-Diagnostic Function
• High Efficiency Design & “Power Saving Mode” to Conserve Energy
• Auto restart when AC in recovering
• Smart battery charger design for optimized battery performance
• Selectable charging current based on applications
• AC input/DC input/Solar input optional priority
• Built-in Transformer
• Wall-Mounted

DESCRIPTION
Specifications of Àmųmà Plus 3KVA (24V)

Model name – GA3024A
Capacity (VA) – 3000VA
Input Voltage (DC) – 24V
Nominal Voltage – 220VAC
Voltage Range – 154-265VAC (AC Model); 185-264VAC±3V(UPS Model)
Frequency 50/60Hz (Auto sensing)
Power Factor – 0.8

Rated Power – 2400W
Voltage – 220VAC
Frequency – 50/60Hz
Waveform Pure Sinewave
Transfer time (AC to DC) <8ms
Transfer time (DC to AC) <8ms
Output Voltage Regulation ±10%
Bypass Mode – Yes
Save mode – Yes
Efficiency >98%
Input protection Circuit breaker
Output protection Circuit breaker
Battery Type AGM- Deep Cycle, Gel Up to 500Ah
Charging current 30A
Low Level disconnect (Selectable) 20V or 21V
PWM (Optional) Controller Voltage
MPPT (Optional) Controller Voltage 15VDC – 30VDC
Maximum PV Array Power 1600W
Maximum PV Array Open circuit Voltage PWM: 105VDC, MPPT:150VDC
Maximum Solar Charge current 60A
Protections Over load, Over temp, Over charging, Battery low, Battery reverse connect, High AC voltage etc
LCD Indicator Status AC Input Voltage, AC Input Frequency, PV Voltage, PV Current
Output Voltage, Output Frequency, Battery Voltage, Load current etc.
LED Indicator Status AC Line in: Green / Inverter: Green / Charging: Yellow / Alarm: Red
Low battery alarm Audible alarm -5 sounds beeping
Overload alarm Audible alarm-continuous beeping
Fault Audible alarm-continuous beeping
Temperature 0 – 40°C
Humidity -10°C-90°C Non Condensing
Accoustic Noise (db) >55dB
Size L*W*H (mm) 470*335*210MM
Weight

Reviews

There are no reviews yet.

Average Rating

0

Rated 0 out of 5
0 Review
5 Star
NAN%
4 Star
NAN%
3 Star
NAN%
2 Star
NAN%
1 Star
NAN%
Be the first to review “Quality Àmųmà Plus 3KVA (24V) Off Grid Solar Inverter”

Your email address will not be published. Required fields are marked *

Vendor Information

  • Address: 32 Oba Akran Avenue Ogba Ikeja Lagos
    Lagos
    Lagos
    +234
  • 4.00 rating from 9 reviews

Quick Comparison

SettingsQuality Àmųmà Plus 3KVA (24V) Off Grid Solar Inverter removeQuality Àmųmà Plus 6KVA (24V) Off Grid Solar Inverter removeQuality Solar Charge Controller (100A) removeQuality Àmųmà Plus 10KVA (48V) removeQuality Solar Charge Controller (40A) removeQUALITY ORVAL TRI 10 remove
ImageÀmųmà Plus 3KVA (24V)Àmųmà Plus 6KVA (24V)SOLAR CHARGE CONTROLLER (100A)Àmųmà Plus 10KVA (48V)Solar Charge Controller (40A)ORVAL TRI 10
SKU
Rating
Rated 0 out of 5
Rated 0 out of 5
Rated 0 out of 5
Rated 0 out of 5
Rated 0 out of 5
Rated 0 out of 5
Price
Stock
Availability
Add to cart

Description

Àmųmà Plus 3KVA (24V)

Model name – GA3024A Capacity (VA) – 3000VA Input Voltage (DC) – 24V Nominal Voltage – 220VAC Voltage Range – 154-265VAC (AC Model); 185-264VAC±3V(UPS Model) Frequency 50/60Hz (Auto sensing) Power Factor – 0.8

Àmųmà Plus 6KVA (24V)

  • Model name – GA6024A
  • Capacity (VA) – 6000VA
  • Input Voltage (DC) – 24V
  • Nominal Voltage – 220VAC
  • Voltage Range – 154-265VAC (AC Model); 185-264VAC±3V(UPS Model)
  • Frequency 50/60Hz (Auto sensing)
  • Power Factor – 0.8
SOLAR CHARGE CONTROLLER (100A)
  • Model: MPPT 100A
  • Max. Charge Current:100A
  • System Voltage:12v/24v/36v/48v
Àmųmà Plus 10KVA (48V) • Support Lithium battery • Support RS232 for WIFI (optional) • Pure Sine Wave output • Powerful Charge Rate Up to 90AMP • DC Start & Automatic Self-Diagnostic Function • High Efficiency Design & “Power Saving Mode” to Conserve Energy • Auto restart when AC in recovering • Smart battery charger design for optimized battery performance • Selectable charging current based on applications • AC input/DC input/Solar input optional priority • Built-in Transformer • Wall-Mounted

Solar Charge Controller (40A)

Model: MPPT 40A Max. Charge Current 40A System Voltage: 12v/24v/36v/48v
ORVAL TRI 10 • Pure SineWave Solar Inverter • On-grid/Off-Grid. • Output power Factor 1.0. • Battery Independent Design • Built-in 120A MPPT Solar charger. • Wide PV input voltage range (90-450VDC). • Built-in anti-dust kit. • Smart battery charger design • 3 phase in/3 phase out
Content

Àmųmà Plus 3KVA (24V)

• Support Lithium battery • Support RS232 for WIFI (optional) • Pure Sine Wave output • Powerful Charge Rate Up to 90AMP • DC Start & Automatic Self-Diagnostic Function • High Efficiency Design & “Power Saving Mode” to Conserve Energy • Auto restart when AC in recovering • Smart battery charger design for optimized battery performance • Selectable charging current based on applications • AC input/DC input/Solar input optional priority • Built-in Transformer • Wall-Mounted DESCRIPTION Specifications of Àmųmà Plus 3KVA (24V) Model name – GA3024A Capacity (VA) – 3000VA Input Voltage (DC) – 24V Nominal Voltage – 220VAC Voltage Range – 154-265VAC (AC Model); 185-264VAC±3V(UPS Model) Frequency 50/60Hz (Auto sensing) Power Factor – 0.8 Rated Power - 2400W Voltage - 220VAC Frequency - 50/60Hz Waveform Pure Sinewave Transfer time (AC to DC) <8ms Transfer time (DC to AC) <8ms Output Voltage Regulation ±10% Bypass Mode - Yes Save mode - Yes Efficiency >98% Input protection Circuit breaker Output protection Circuit breaker Battery Type AGM- Deep Cycle, Gel Up to 500Ah Charging current 30A Low Level disconnect (Selectable) 20V or 21V PWM (Optional) Controller Voltage MPPT (Optional) Controller Voltage 15VDC - 30VDC Maximum PV Array Power 1600W Maximum PV Array Open circuit Voltage PWM: 105VDC, MPPT:150VDC Maximum Solar Charge current 60A Protections Over load, Over temp, Over charging, Battery low, Battery reverse connect, High AC voltage etc LCD Indicator Status AC Input Voltage, AC Input Frequency, PV Voltage, PV Current Output Voltage, Output Frequency, Battery Voltage, Load current etc. LED Indicator Status AC Line in: Green / Inverter: Green / Charging: Yellow / Alarm: Red Low battery alarm Audible alarm -5 sounds beeping Overload alarm Audible alarm-continuous beeping Fault Audible alarm-continuous beeping Temperature 0 – 40°C Humidity -10°C-90°C Non Condensing Accoustic Noise (db) >55dB Size L*W*H (mm) 470*335*210MM Weight

Àmųmà Plus 6KVA (24V)

• Support Lithium battery • Support RS232 for WIFI (optional) • Pure Sine Wave output • Powerful Charge Rate Up to 90AMP • DC Start & Automatic Self-Diagnostic Function • High Efficiency Design & “Power Saving Mode” to Conserve Energy • Auto restart when AC in recovering • Smart battery charger design for optimized battery performance • Selectable charging current based on applications • AC input/DC input/Solar input optional priority • Built-in Transformer • Wall-Mounted DESCRIPTION Specification Of Àmųmà Plus 6KVA (24V) Model name – GA6024A Capacity (VA) – 6000VA Input Voltage (DC) – 24V Nominal Voltage – 220VAC Voltage Range – 154-265VAC (AC Model); 185-264VAC±3V(UPS Model) Frequency 50/60Hz (Auto sensing) Power Factor – 0.8 Rated Power 4800W Voltage 220VAC Frequency 50/60Hz Waveform Pure Sinewave Transfer time (AC to DC) <8ms Transfer time (DC to AC) <8ms Output Voltage Regulation ±10% Bypass Mode Yes Save mode Yes Efficiency >98% Input protection Circuit breaker Output protection Circuit breaker Battery Type AGM- Deep Cycle, Gel Up to 500Ah Charging current 60A Low Level disconnect (Selectable) 20V or 21V PWM (Optional) Controller Voltage 30VDC - 60VDC MPPT (Optional) Controller Voltage 30VDC - 60VDC Maximum PV Array Power 1600W Maximum PV Array Open circuit Voltage PWM: 150VDC, MPPT:150VDC Maximum Solar Charge current 100A Protections Over load, Over temp, Over charging, Battery low, Battery reverse connect, High AC voltage etc LCD Indicator Status AC Input Voltage, AC Input Frequency, PV Voltage, PV Current Output Voltage, Output Frequency, Battery Voltage, Load current etc. LED Indicator Status AC Line in: Green / Inverter: Green / Charging: Yellow / Alarm: Red Low battery alarm Audible alarm -5 sounds beeping Overload alarm Audible alarm-continuous beeping Fault Audible alarm-continuous beeping Temperature 0 – 40°C Humidity -10°C-90°C Non Condensing Accoustic Noise (db) >55dB Size L*W*H (mm) 470*335*210MM Weight 29
SOLAR CHARGE CONTROLLER (100A) Model: MPPT 100A Max. Charge Current:100A System Voltage:12v/24v/36v/48v Flexible Max. PV Voltage (VoC):150Vdc Solar Operating Voltage: 20-150Vdc @12V 36-150Vdc @24v 48-150Vdc @36v 64-150Vdc @48v PV Input Power:12v: 1040w 24v: 2600w 36v: 3900w 48v: 5200w Operation Temperature-25~60°CÀmųmà Plus 10KVA (48V) Specification Of Àmųmà Plus 10KVA (48V) Model name – GA10048A Capacity (VA) – 10000VA Input Voltage (DC) – 48V Nominal Voltage – 220VAC Voltage Range – 154-265VAC (AC Model); 185-264VAC±3V(UPS Model) Frequency - 50/60Hz (Auto sensing) Power Factor – 0.8 Rated Power: 8000W Voltage: 220VAC Frequency: 50/60Hz Waveform: Pure SineWave Transfer time (AC to DC): <8ms Transfer time (DC to AC): <8ms Output Voltage Regulation: ±10% Bypass Mode: Yes Save mode: Yes Efficiency: >98% Input protection: Circuit breaker Output protection: Circuit breaker Battery Type: AGM- Deep Cycle, Gel Up to 500Ah Charging current: 42A Low Level disconnect (Selectable): 40V or 42V PWM (Optional) Controller Voltage: 30VDC – 60VDC MPPT (Optional) Controller Voltage: 30VDC – 150VDC Maximum PV Array Power: 3200W Maximum PV Array Open circuit Voltage: MPPT:150VDC Maximum Solar Charge current: 100A Protections: Over load, Over temp, Over charging, Battery low, Battery reverse connect, High AC voltage etc LCD Indicator Status: AC Input Voltage, AC Input Frequency, PV Voltage, PV Current Output Voltage, Output Frequency, Battery Voltage, Load current etc. LED Indicator Status: AC Line in: Green / Inverter: Green / Charging: Yellow / Alarm: Red Low battery alarm: Audible alarm -5 seconds beeping Overload alarm: Audible alarm-continuous beeping Fault: Audible alarm-continuous beeping Temperature: 0 – 40°C Humidity -10°C-90°C Non Condensing Accoustic Noise (db): >55dB Size L*W*H (mm): 470*335*210MM Weight: 40  

Solar Charge Controller (40A)

Model: MPPT 40A Max. Charge Current 40A System Voltage: 12v/24v/36v/48v Flexible Max. PV Voltage (VoC): 150Vdc Solar Operating Voltage: 20-150Vdc @12V 36-150Vdc @24v 48-150Vdc @36v 64-150Vdc @48v PV Input Power: 12v: 540w 24v: 1080w 36v: 1620w 48v: 2180w Operation Temperature -25~60°C
ORVAL TRI 10 DESCRIPTION SPECIFICATIONS Model name : TRI-10KW Phase Type 3 Phase in / 3 Phase Out Maximum PV input Power 14850W Rated Output Power 10000W Maximum Charging Power 9600W Nominal DC Voltage /Maximum DC Voltage 720VDC / 900VDC Start-up Voltage / Initial Feeding Voltage MMPT Voltage Range 400VDC / 800VDC Number of MPPT Trackers / Maximum Input Current 2/2* 18.6A Nominal Output Voltage 230VAC (P-N), 400VAC (P-P) Output Voltage Range 184VAC to 265VAC per phase Nominal Output Current Power Factor <0.99 European Efficiency 96% Maximum Conversion Efficiency 96% AC Startup Voltage / Auto Restart Voltage 120VAC to 140VAC P-P/ 180 VAC P-P Acceptable Input Voltage Range 170VAC to 280VAC per phase Maximum AC Input Current 40A Maximum DC Voltage 900VDC MPPT Voltage Range 400VDC to 800VDC Number of MPPT Trackers / Maximum Input Current Nominal Output Voltage 230VAC (P-N), 400VAC (P-P) Output Waveform Pure Sinewave Efficiency (DC to AC) 91% Nominal DC Voltage /Maximum DC Voltage 720VDC / 900VDC Start-up Voltage / Initial Feeding Voltage 320VDC / 350VDC MPPT Voltage Range 400VDC / 800VDC Number of MPPT Trackers / Maximum Input Current 2/2* 18.6A Nominal Output Voltage 230VAC (P-N), 400VAC (P-P) Output Voltage Range 184VAC to 265VAC Per Phase Nominal Output Current 14.5A Per Phase AC Startup Voltage / Auto Restart Voltage 120-140VAC P-P/ 180 VAC P-P Acceptable Input Voltage Range 170 VAC to 280 VAC Per Phase Maximum AC Input Current 40A Nominal Output Voltage 230VAC (P-N), 400VAC (P-P) Efficiency (DC to AC) 91% Nominal DC Voltage 48VDC Maximum Charging Current Default 60A, (10A to 200A adjustable) Communication Port RS-232 / USB Intelligent Slot Optional SNMP, Modbus and As400 Card Dimensions (D*W*L: mm) and Weight (KG) 167.2*500*622, 40KG Humidity 0 to 90% (non condensing Operation temperature 0 to 55 Altitude 0 to 1000 Meter
Weight
DimensionsN/AN/AN/AN/AN/AN/A
Additional information