Quality Àmųmà Plus 6KVA (24V) Off Grid Solar Inverter

Àmųmà Plus 6KVA (24V)

  • Model name – GA6024A
  • Capacity (VA) – 6000VA
  • Input Voltage (DC) – 24V
  • Nominal Voltage – 220VAC
  • Voltage Range – 154-265VAC (AC Model); 185-264VAC±3V(UPS Model)
  • Frequency 50/60Hz (Auto sensing)
  • Power Factor – 0.8

Àmųmà Plus 6KVA (24V)

• Support Lithium battery
• Support RS232 for WIFI (optional)
• Pure Sine Wave output
• Powerful Charge Rate Up to 90AMP
• DC Start & Automatic Self-Diagnostic Function
• High Efficiency Design & “Power Saving Mode” to Conserve Energy
• Auto restart when AC in recovering
• Smart battery charger design for optimized battery performance
• Selectable charging current based on applications
• AC input/DC input/Solar input optional priority
• Built-in Transformer
• Wall-Mounted

DESCRIPTION
Specification Of Àmųmà Plus 6KVA (24V)

Model name – GA6024A
Capacity (VA) – 6000VA
Input Voltage (DC) – 24V
Nominal Voltage – 220VAC
Voltage Range – 154-265VAC (AC Model); 185-264VAC±3V(UPS Model)
Frequency 50/60Hz (Auto sensing)
Power Factor – 0.8

Rated Power 4800W
Voltage 220VAC
Frequency 50/60Hz
Waveform Pure Sinewave
Transfer time (AC to DC) <8ms
Transfer time (DC to AC) <8ms
Output Voltage Regulation ±10%
Bypass Mode Yes
Save mode Yes
Efficiency >98%
Input protection Circuit breaker
Output protection Circuit breaker
Battery Type AGM- Deep Cycle, Gel Up to 500Ah
Charging current 60A
Low Level disconnect (Selectable) 20V or 21V
PWM (Optional) Controller Voltage 30VDC – 60VDC
MPPT (Optional) Controller Voltage 30VDC – 60VDC
Maximum PV Array Power 1600W
Maximum PV Array Open circuit Voltage PWM: 150VDC, MPPT:150VDC
Maximum Solar Charge current 100A
Protections Over load, Over temp, Over charging, Battery low, Battery reverse connect, High AC voltage etc
LCD Indicator Status AC Input Voltage, AC Input Frequency, PV Voltage, PV Current
Output Voltage, Output Frequency, Battery Voltage, Load current etc.
LED Indicator Status AC Line in: Green / Inverter: Green / Charging: Yellow / Alarm: Red
Low battery alarm Audible alarm -5 sounds beeping
Overload alarm Audible alarm-continuous beeping
Fault Audible alarm-continuous beeping
Temperature 0 – 40°C
Humidity -10°C-90°C Non Condensing
Accoustic Noise (db) >55dB
Size L*W*H (mm) 470*335*210MM
Weight 29

Reviews

There are no reviews yet.

Average Rating

0

Rated 0 out of 5
0 Review
5 Star
NAN%
4 Star
NAN%
3 Star
NAN%
2 Star
NAN%
1 Star
NAN%
Be the first to review “Quality Àmųmà Plus 6KVA (24V) Off Grid Solar Inverter”

Your email address will not be published. Required fields are marked *

Vendor Information

  • Address: 32 Oba Akran Avenue Ogba Ikeja Lagos
    Lagos
    Lagos
    +234
  • 4.00 rating from 9 reviews

Quick Comparison

SettingsQuality Àmųmà Plus 6KVA (24V) Off Grid Solar Inverter removeQuality Gamma 6 Hybrid Solar Inverter removeQUALITY ORVAL TRI 10 removeQuality Àmųmà Plus 10KVA (48V) removeQuality Grovolt Ricco Plus 5KVA (24/48v) Off Grid Solar Inverter removeQuality Àmųmà Plus 1.5KVA (12V) Off Grid Solar Inverter remove
ImageÀmųmà Plus 6KVA (24V)Quality Gamma 6 Hybrid Solar InverterORVAL TRI 10Àmųmà Plus 10KVA (48V)Quality Grovolt Ricco Plus 5KVA (24/48v) Off Grid Solar InverterÀmųmà Plus 2KVA (12/24V)
SKU
Rating
Rated 0 out of 5
Rated 0 out of 5
Rated 0 out of 5
Rated 0 out of 5
Rated 0 out of 5
Rated 0 out of 5
Price
Stock
Availability
Add to cart

Description

Àmųmà Plus 6KVA (24V)

  • Model name – GA6024A
  • Capacity (VA) – 6000VA
  • Input Voltage (DC) – 24V
  • Nominal Voltage – 220VAC
  • Voltage Range – 154-265VAC (AC Model); 185-264VAC±3V(UPS Model)
  • Frequency 50/60Hz (Auto sensing)
  • Power Factor – 0.8
Gamma 6 Hybrid                                                                                                                                                                                                                                                                                Technical features MODEL Name – Gamma 6 Model Number – ONY-I-G6-48 Maximum PV Input Power – 6000W Rated Output Power – 6000WORVAL TRI 10 • Pure SineWave Solar Inverter • On-grid/Off-Grid. • Output power Factor 1.0. • Battery Independent Design • Built-in 120A MPPT Solar charger. • Wide PV input voltage range (90-450VDC). • Built-in anti-dust kit. • Smart battery charger design • 3 phase in/3 phase outÀmųmà Plus 10KVA (48V) • Support Lithium battery • Support RS232 for WIFI (optional) • Pure Sine Wave output • Powerful Charge Rate Up to 90AMP • DC Start & Automatic Self-Diagnostic Function • High Efficiency Design & “Power Saving Mode” to Conserve Energy • Auto restart when AC in recovering • Smart battery charger design for optimized battery performance • Selectable charging current based on applications • AC input/DC input/Solar input optional priority • Built-in Transformer • Wall-Mounted

Grovolt Ricco Plus 5KVA

* Pure Sine Wave Inverter * Inbuilt With Transformer which is a strong load ability. * Wide Charge Current 20-30A * High-efficiency design & Power saving mode to conserve energy. * Auto-restart when AC recovering.
Àmųmà Plus 1.5KVA (12V) Model name – GA1512A Capacity (VA) – 1500VA Input Voltage (DC) – 12V Nominal Voltage – 220VAC Voltage Range – 154-265VAC (AC Model); 185-264VAC±3V(UPS Model) Frequency 50/60Hz (Auto sensing) Power Factor – 0.8
Content

Àmųmà Plus 6KVA (24V)

• Support Lithium battery • Support RS232 for WIFI (optional) • Pure Sine Wave output • Powerful Charge Rate Up to 90AMP • DC Start & Automatic Self-Diagnostic Function • High Efficiency Design & “Power Saving Mode” to Conserve Energy • Auto restart when AC in recovering • Smart battery charger design for optimized battery performance • Selectable charging current based on applications • AC input/DC input/Solar input optional priority • Built-in Transformer • Wall-Mounted DESCRIPTION Specification Of Àmųmà Plus 6KVA (24V) Model name – GA6024A Capacity (VA) – 6000VA Input Voltage (DC) – 24V Nominal Voltage – 220VAC Voltage Range – 154-265VAC (AC Model); 185-264VAC±3V(UPS Model) Frequency 50/60Hz (Auto sensing) Power Factor – 0.8 Rated Power 4800W Voltage 220VAC Frequency 50/60Hz Waveform Pure Sinewave Transfer time (AC to DC) <8ms Transfer time (DC to AC) <8ms Output Voltage Regulation ±10% Bypass Mode Yes Save mode Yes Efficiency >98% Input protection Circuit breaker Output protection Circuit breaker Battery Type AGM- Deep Cycle, Gel Up to 500Ah Charging current 60A Low Level disconnect (Selectable) 20V or 21V PWM (Optional) Controller Voltage 30VDC - 60VDC MPPT (Optional) Controller Voltage 30VDC - 60VDC Maximum PV Array Power 1600W Maximum PV Array Open circuit Voltage PWM: 150VDC, MPPT:150VDC Maximum Solar Charge current 100A Protections Over load, Over temp, Over charging, Battery low, Battery reverse connect, High AC voltage etc LCD Indicator Status AC Input Voltage, AC Input Frequency, PV Voltage, PV Current Output Voltage, Output Frequency, Battery Voltage, Load current etc. LED Indicator Status AC Line in: Green / Inverter: Green / Charging: Yellow / Alarm: Red Low battery alarm Audible alarm -5 sounds beeping Overload alarm Audible alarm-continuous beeping Fault Audible alarm-continuous beeping Temperature 0 – 40°C Humidity -10°C-90°C Non Condensing Accoustic Noise (db) >55dB Size L*W*H (mm) 470*335*210MM Weight 29
Gamma 6 Hybrid Technical features MODEL Name – Gamma 6 Model Number – ONY-I-G6-48 Maximum PV Input Power – 6000W Rated Output Power – 6000W Gamma 6 Hybrid • Pure sine wave output & Dual AC output • Self-consumption and feed-in to the grid • Built-in MPPT solar charger • Programmable supply priority for PV, Battery or Grid • User-adjustable charging current and voltage • Programmable multiple operation modes: Grid-tie,off-grid and grid-tie with backup • Detachable LCD panel • Built-in Wi-Fi for mobile monitoring (APP is available) • Supports USB on the go function • Reserve BMS communication • Parallel operation up to 9 units SPECIFICATIONS GRID TIE OPERATION (AC) / PV INPUT (DC) / HYBRID OPERATION Power Rate/Nominal DC Voltage/Maximum DC Voltage - 360VDC/500VDC Start-up Voltage/ Initial Feeding Voltage – 120VDC/150VDC MPPT Voltage Range – 120VDC~150VDC/430VDC Number of MPPT Trackers / Max Input Current - 1/27A GRID TIE OPERATION / GRID OUTPUT (AC) / HYBRID OPERATION Nominal Output Voltage - 220/230/240VAC Output Voltage Range - 184 – 264.5 VAC or 195.5 – 253 VAC (Selectable) Nominal Output Current - 26A GRID TIE OPERATION / EFFICIENCY Maximum Conversion Efficiency (DC/AC) - 95% OFF-GRID OPERATION / AC INPUT / HYBRID OPERATION AC Startup Voltage / Auto Restart Voltage – 120 - 140VAC / 180VAC Acceptable Input Voltage Range - 90-280VAC or 170 - 280VAC Frequency Range - 50Hz / 60Hz (Auto Sensing) Maximum AC Input Current - 40A OFF-GRID OPERATION / PV INPUT (DC) Maximum DC Voltage - 500VDC MPPT Voltage Range – 120VDC ~ 430VAC Number of MPPT Trackers / Max Input Current - (1/27A) OFF-GRID OPERATION / BATTERY MODE OUTPUT (AC) Battery Mode Output (AC) - 220/230/240VAC Output Waveform - Pure Sine Wave Efficiency (DC to AC) - 93% HYBRID OPERATION / BATTERY MODE OUTPUT Nominal Output Voltage - 220/230/240VAC Efficiency (DC to AC) - 93% HYBRID OPERATION / BATTERY & CHARGER Maximum DC Voltage - 48V Maximum Solar Charging Current – 120A Maximum AC Charging Current – 120A Maximum Charging Current – 120A GENERAL / PHYSICAL of Gamma 6 Hybrid Dimension, D x W x H (mm) – 140 x 295 x 468 Net Weight – 14KG GENERAL / INTERFACE Parallel Function – Built in parallel kit up to 9 units Communication Port – USB/RS-232/WiFi/Dry-Contact GENERAL / ENVIRONMENT Humidity – 0~ 90% RH (No Condensing) Operating Temperature –  -10°C to 50°CORVAL TRI 10 DESCRIPTION SPECIFICATIONS Model name : TRI-10KW Phase Type 3 Phase in / 3 Phase Out Maximum PV input Power 14850W Rated Output Power 10000W Maximum Charging Power 9600W Nominal DC Voltage /Maximum DC Voltage 720VDC / 900VDC Start-up Voltage / Initial Feeding Voltage MMPT Voltage Range 400VDC / 800VDC Number of MPPT Trackers / Maximum Input Current 2/2* 18.6A Nominal Output Voltage 230VAC (P-N), 400VAC (P-P) Output Voltage Range 184VAC to 265VAC per phase Nominal Output Current Power Factor <0.99 European Efficiency 96% Maximum Conversion Efficiency 96% AC Startup Voltage / Auto Restart Voltage 120VAC to 140VAC P-P/ 180 VAC P-P Acceptable Input Voltage Range 170VAC to 280VAC per phase Maximum AC Input Current 40A Maximum DC Voltage 900VDC MPPT Voltage Range 400VDC to 800VDC Number of MPPT Trackers / Maximum Input Current Nominal Output Voltage 230VAC (P-N), 400VAC (P-P) Output Waveform Pure Sinewave Efficiency (DC to AC) 91% Nominal DC Voltage /Maximum DC Voltage 720VDC / 900VDC Start-up Voltage / Initial Feeding Voltage 320VDC / 350VDC MPPT Voltage Range 400VDC / 800VDC Number of MPPT Trackers / Maximum Input Current 2/2* 18.6A Nominal Output Voltage 230VAC (P-N), 400VAC (P-P) Output Voltage Range 184VAC to 265VAC Per Phase Nominal Output Current 14.5A Per Phase AC Startup Voltage / Auto Restart Voltage 120-140VAC P-P/ 180 VAC P-P Acceptable Input Voltage Range 170 VAC to 280 VAC Per Phase Maximum AC Input Current 40A Nominal Output Voltage 230VAC (P-N), 400VAC (P-P) Efficiency (DC to AC) 91% Nominal DC Voltage 48VDC Maximum Charging Current Default 60A, (10A to 200A adjustable) Communication Port RS-232 / USB Intelligent Slot Optional SNMP, Modbus and As400 Card Dimensions (D*W*L: mm) and Weight (KG) 167.2*500*622, 40KG Humidity 0 to 90% (non condensing Operation temperature 0 to 55 Altitude 0 to 1000 MeterÀmųmà Plus 10KVA (48V) Specification Of Àmųmà Plus 10KVA (48V) Model name – GA10048A Capacity (VA) – 10000VA Input Voltage (DC) – 48V Nominal Voltage – 220VAC Voltage Range – 154-265VAC (AC Model); 185-264VAC±3V(UPS Model) Frequency - 50/60Hz (Auto sensing) Power Factor – 0.8 Rated Power: 8000W Voltage: 220VAC Frequency: 50/60Hz Waveform: Pure SineWave Transfer time (AC to DC): <8ms Transfer time (DC to AC): <8ms Output Voltage Regulation: ±10% Bypass Mode: Yes Save mode: Yes Efficiency: >98% Input protection: Circuit breaker Output protection: Circuit breaker Battery Type: AGM- Deep Cycle, Gel Up to 500Ah Charging current: 42A Low Level disconnect (Selectable): 40V or 42V PWM (Optional) Controller Voltage: 30VDC – 60VDC MPPT (Optional) Controller Voltage: 30VDC – 150VDC Maximum PV Array Power: 3200W Maximum PV Array Open circuit Voltage: MPPT:150VDC Maximum Solar Charge current: 100A Protections: Over load, Over temp, Over charging, Battery low, Battery reverse connect, High AC voltage etc LCD Indicator Status: AC Input Voltage, AC Input Frequency, PV Voltage, PV Current Output Voltage, Output Frequency, Battery Voltage, Load current etc. LED Indicator Status: AC Line in: Green / Inverter: Green / Charging: Yellow / Alarm: Red Low battery alarm: Audible alarm -5 seconds beeping Overload alarm: Audible alarm-continuous beeping Fault: Audible alarm-continuous beeping Temperature: 0 – 40°C Humidity -10°C-90°C Non Condensing Accoustic Noise (db): >55dB Size L*W*H (mm): 470*335*210MM Weight: 40  

Grovolt Ricco Plus 5KVA

* Pure Sine Wave Inverter * Inbuilt With Transformer which is a strong load ability. * Wide Charge Current 20-30A * High-efficiency design & Power saving mode to conserve energy. * Auto-restart when AC recovering. * Smart battery charger design for optimized battery performance; With bypass /battery reverse protection / 6mill seconds transfer time / surge protection/input & output overload protection DESCRIPTION SPECIFICATIONS of Grovolt Ricco Plus 5KVA Model name – RP-50000 Input Capacity – 5000VA Voltage (DC) – 24/48V Nominal Voltage – 220VAC/110VAC Voltage Range – 154-265VAC/77-135VAC Frequency 50/60Hz (Auto sensing) OUTPUT Watt 800W | 1200W | 2000W | 2800W | 4000W | 4800W | 5200W | 6400W | 8000W Voltage – 220VAC/110VAC Frequency - 50Hz to 60Hz Waveform – Pure Sinewave Transfer time (AC to DC) <8ms Transfer time (DC to AC) <8ms Output Voltage Regulation 10%rms Bypass Mode Yes Save mode Yes Efficiency >98% PROTECTION Input protection Circuit breaker Output protection Circuit breaker BATTERY BATTERY TYPE AGM- Deep Cycle Gel Up to 500Ah Charging current 20/10A |30/15/7A | 48/24/12A | 30/15A | 40/20A | 45/22A | 50/25A | 35A | 50/25/12A Low level disconnect (10V or 10.5V) × N N means the number of batteries in series LCD INDICATOR STATUS Input AC/ Output AC Battery DC, Output Load Alarm, Fault Battery Charge Level Output Frequency LED INDICATOR STATUS AC Line in: Green Inverter: Green Charging: Yellow Alarm: Red Grovolt Ricco Plus 5KVA Battery low alarm battery light discharge 11.5V*N; battery load discharge 11.5V*N@load<20% 11V*N@load>50% / 10.5V*N@load>50% Battery low recovery battery light discharge 11.5V*N; battery load discharge 11.5V*N@load<20% 11.5V*N@load>50% / 11V*N@load>50% DC low voltage shutdown battery light discharge 11.5V*N; battery load discharge 11.5V*N@load<20% 10.5V*N@load>50% / 10.5V*N@load>50% DC high Voltage alarm & fault 16V*N DC high Voltage recovery 15V*N ALARM Low battery alarm Audible alarm -1 beeping per second Overload alarm Audible alarm-continuous beeping Fault Audible alarm-continuous beeping ENVIRONMENT Temperature - (0 - 40) Humidity - CO-95% Non Condensing Fault – >55db
Àmųmà Plus 1.5KVA (12V) • Support Lithium battery • Support RS232 for WIFI (optional) • Pure Sine Wave output • Powerful Charge Rate Up to 90AMP • DC Start & Automatic Self-Diagnostic Function • High Efficiency Design & “Power Saving Mode” to Conserve Energy • Auto restart when AC in recovering • Smart battery charger design for optimized battery performance • Selectable charging current based on applications • AC input/DC input/Solar input optional priority • Built-in Transformer • Wall-Mounted DESCRIPTION SPECIFICATIONS Model name – GA1512A Capacity (VA) – 1500VA Input Voltage (DC) – 12V Nominal Voltage – 220VAC Voltage Range – 154-265VAC (AC Model); 185-264VAC±3V(UPS Model) Frequency 50/60Hz (Auto sensing) Power Factor – 0.8 Rated Power 1200W Voltage 220VAC Frequency 50/60Hz Waveform Pure Sinewave Transfer time (AC to DC) <8ms Transfer time (DC to AC) <8ms Output Voltage Regulation ±10% Bypass Mode Yes Save mode Yes Efficiency >98% Input protection Circuit breaker Output protection Circuit breaker Battery Type AGM- Deep Cycle, Gel Up to 500Ah Charging current 30A Low Level disconnect (Selectable) 10V or 10.5V PWM (Optional) Controller Voltage 15VDC - 30VDC MPPT (Optional) Controller Voltage 15VDC - 30VDC Maximum PV Array Power 400W Maximum PV Array Open circuit Voltage PWM: 50VDC Maximum Solar Charge current 30A Protections Over load, Over temp, Ove charging, Battery low, Battery reverse connect, High AC voltage etc LCD Indicator Status AC Input Voltage, AC Input Frequency, PV Voltage, PV Current Output Voltage, Output Frequency, Battery Voltage, Load current etc. LED Indicator Status AC Line in: Green / Inverter: Green / Charging: Yellow / Alarm: Red Low battery alarm Audible alarm -5 sounds beeping Overload alarm Audible alarm-continuous beeping Fault Audible alarm-continuous beeping Temperature 0 – 40°C Humidity -10°C-90°C Non Condensing Accoustic Noise (db) >55dB Size L*W*H (mm) 325*263*123MM Weight
Weight
DimensionsN/AN/AN/AN/AN/AN/A
Additional information