Description |
- APC 1000VA 230V Easy UPS On-Line SRV
-
High quality, Double-conversion online UPS designed for essential power protection needs even in the most unstable power conditions.
-
Includes: Basic UPS signaling RS-232 cable, CD with software, USB cable, User manual
| APC EASY UPS BV 650VA
- Output power capacity: 375 Watts / 650 VA
- Max Configurable Power (Watts): 375 Watts / 650 VA
- Nominal Output Voltage: 230V
- Output Frequency (not synced): 50/60 Hz +/-1 Hz
| Delta 8 Hybrid
• Operation Type: Off-Grid/On-Grid
• Sine wave Type: Pure, Power Factor 1.0
• Dual AC output for smart load management
• Battery Independent Design
• Wide PV input voltage range (90-450VDC)
• Built-in WiFi with IOS & Android APP
• Supports USB on the go function
• RGB Lightning for different working modes (Battery, Solar, Utility)
• With Parallel kits support up to 6 units | Beta 4.2 Hybrid Solar Inverter
• Pure sine wave inverter
• Output power factor:1
• Battery independent design
• RGB lighting for different operation modes
• OFF/ON Grid Operation types
• Built-in 120 /140Ah solar charger
• High PV input range (90VDC to 500VC)
• Max PV input power 6200 | Sollatek AVS13 Voltshield Appliance Guard
AVS13
Over & Under Voltage Protection for Laptops, Monitors, Fridges, Coolers, Media Centres & Satellites
Protect against
- High voltage
- Low voltage
- Spikes/surges
- Powerback surges
Ideal for
- All electrical and electronic equipment
Max current: 13 amps
Wait time: User adjustable from 10 seconds to 3 minutes
| Grovolt Ricco Plus 3.5KVA (24/48V)
* Pure Sine Wave Inverter
* Inbuilt With Transformer which is a strong load ability.
* Wide Charge Current 20-30A
* High-efficiency design & Power saving mode to conserve energy.
* Auto-restart when AC recovering. |
Content |
APC 1000VA 230V Easy UPS On-Line SRV
Output Connections
(3) IEC 60320 C13 (Battery Backup)
(3) IEC 320 C13 (Battery Backup)
APC Easy UPS On-Line SRV 1000VA 230V.
High quality, Double-conversion On-line UPS designed for essential power protection needs even in the most unstable power conditions.
Includes: Basic UPS signaling RS-232 cable, CD with software, USB cable, User manual
- Automatic internal bypass
Pure static bypass switch without bridging contactor securing a fast and reliable transfer to and from bypass, rated for 125% nominal load.
- Automatic restart of loads after UPS shutdown
Automatically starts up the connected equipment upon the return of utility power.
- ECO Mode
Operating mode that by-passes unused electrical components in good power conditions to achieve high operating efficiency without sacrificing protection
- Input Power Factor Correction
APC 1000VA 230V Easy UPS On-Line SRV
is product has a power factor corrected input side ensuring that the input power factor is always 1 regardless of load and mains voltage.
A power factor of 1 minimizes installation costs by allowing the use of smaller cables and smaller fuses.
- Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
- Intelligent SmartSlot
Mini slot supports various optional management cards which provide basic or essential monitoring, management and control features for the UPS.
- LCD graphics display
Text and mimic diagrams that display modes of operation, system parameters and alarms.
- Serial connectivity
Provides management of the UPS via a serial port.
- USB connectivity
Provides management of the UPS via a USB port (not available on all models).
Audible alarms
Provides notification of changing utility power and UPS power conditions
Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Disconnected battery notification
Warns when a battery is not available to provide backup power.
Predictive failure notification.
Provides early-warning fault analysis ensuring proactive component replacement.
Network manageable
Most models provide remote power management options of the UPS over the network. Many do not have NMC embedded.
Serial connectivity
Provides management of the UPS via a serial port.
SmartSlot
Customize UPS capabilities with management cards.
LCD graphics display
Text and mimic diagrams that display modes of operation, system parameters, and alarms.
LED Indicators
Provide easy-to-read status of the unit and utility power conditions.
Intuitive LCD interface
Provides clear and accurate information in multiple languages with the ability to configure the UPS locally with easy-to-use navigation keys.
Management Software
Allows you to easily monitor your utility power and manage your UPS.
Input Power Factor Correction
Minimizes installation costs by enabling the use of smaller generators and cabling.
Double conversion on-line topology
APC 1000VA 230V Easy UPS On-Line SRVÂ Guarantees a consistently high level of power quality.
Any disturbances on the distribution waveform are regenerated via the zero transfer time AC to DC then DC to AC conversion process.
The battery is only used as a back-up source.
ECO Mode
Operating mode that by-passes unused electrical components in good power conditions to achieve high operating efficiency without sacrificing protection
Generator compatible
Ensures clean, uninterrupted power to protected equipment when generator power is used.
High efficiency
APC 1000VA 230V Easy UPS On-Line SRV High efficiency rates that remain stable even at lower operating power levels
Pure sine wave output on battery
Simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.
Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
Allows the user to manage the UPS functions, schedule automatic shutdown and monitor the power grid occurrences through an interactive interface that ensures an easy and intuitive monitoring.
Intelligent battery management
APC 1000VA 230V Easy UPS On-Line SRV it Maximizes battery performance, life, and reliability through intelligent, precision charging.
United Arab Emirates, Afghanistan, Albania, Armenia, Netherlands Antilles, Angola, Australia, Bosnia and Herzegovina, Belgium, Burkina Faso, Bolivia, Botswana, The Democratic Republic Of Congo, Chile, Cameroon, Colombia, Serbia and Montenegro, Cyprus, Czech Republic, Germany, Denmark, Dominica, Algeria, Estonia, Egypt, Spain, Finland, France, Gabon, Georgia, French Guiana, Gambia, Guadeloupe, Greece, Croatia, Hungary, Indonesia, Ireland, Israel, Iraq, Iceland, Italy, Jordan, Cambodia, South Korea, Lebanon, Saint Lucia, Liberia, Lithuania, Luxembourg, Latvia, Morocco, Madagascar, Macedonia, Myanmar, Mongolia, Martinique, Mauritania, Malta, Mauritius, Malawi, Malaysia, Namibia, Nigeria, Netherlands, Norway, Oman, Philippines, Pakistan, Poland, Portugal, Romania, Russia, Sweden, Singapore, Slovenia, Slovakia, Sierra Leone, Senegal, Togo, Thailand, Tajikistan, Turkmenistan, Tunisia, Turkey, Ukraine, Uzbekistan, Vietnam, South Africa, Zambia, Zimbabwe
Max Configurable Power (Watts)
Output Voltage Note
Configurable for 220 : 230 or 240 nominal output voltage
Output Frequency (sync to mains)
50/60 Hz +/- 3 Hz Sync to mains
Bypass
Internal bypass (automatic and manual)
Input voltage range for main operations
110 - 285 Half load, 160 - 280 Full loadV
Expected Battery Life (years)
Battery Charge Power (Watts)
Runtime APC 1000VA 230V Easy UPS On-Line SRV
Efficiency APC 1000VA 230V Easy UPS On-Line SRV
Control panel of APC 1000VA 230V Easy UPS On-Line SRV
Multifunction LCD status and control console
Audible Alarm
Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm
Available SmartSlotâ„¢ Interface Quantity
Color APC 1000VA 230V Easy UPS On-Line SRV
Operating Relative Humidity
0 - 95 (Non-condensing) %
Storage Relative Humidity
0 - 95 (Non-condensing) %
Audible noise at 1 meter from surface of unit
Online thermal dissipation
Approvals
CE, EAC, EN/IEC 62040-1, EN/IEC 62040-2
Standard warranty of APC 1000VA 230V Easy UPS On-Line SRV
2 years repair or replace
| APC EASY UPS BV 650VA
APC EASY UPS BV 650VA, AVR, Universal Outlet, 230V
Best Value UPS with Battery Backup & Surge Protection for Electronics and Computers
Output
Max Configurable Power (Watts):375Watts / 650VA
Output Frequency (not synced):50/60 Hz +/-1 Hz
Topology:Line Interactive
Waveform type: Stepped approximation to a sinewave
Transfer Time:6ms typical : 10ms maximum
Input
Input frequency:50/60 Hz +/- 5 Hz (auto sensing)
Number of Power Cords:1
Batteries & Runtime
Battery type:Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
Expected Battery Life (years):3 – 5
Communications & Management
Control panel:LED Status display with On Line : On Battery
Audible Alarm: Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm
Net Weight:4.5KG
FEATURES OF APC EASY UPS BV 650VA
- Provides temporary battery power when the utility power is out
- Protect equipment with input transformer blocks without blocking access to other receptacles.
- Slim, modern design can be upright, flat, or wall-mounted to comfortably fit any electronics set-up and complement home décor.
- Preserves battery life and maximizes runtime by correcting low voltages without discharging the battery.
| Delta 8.2 Hybrid
Technical features
MODEL Name - Delta 8.2
Model Number - ONY-I-D8.2-48
Rated Power - 8200VA/8200W
PARALLEL CAPABILITY - Yes, up to 6 units
Delta 8 Hybrid
• Operation Type: Off-Grid/On-Grid
• Sine wave Type: Pure, Power Factor 1.0
• Dual AC output for smart load management
• Battery Independent Design
• Wide PV input voltage range (90-450VDC)
• Built-in WiFi with IOS & Android APP
• Supports USB on the go function
• RGB Lightning for different working modes (Battery, Solar, Utility)
• With Parallel kits support up to 6 units
INPUT
Voltage - 230 VAC
Selectable Voltage Range - 170-280 VAC (For Personal Computers)/90-280 VAC (For Home Appliances)
Frequency Range - 50 Hz/60 Hz (Auto sensing)
OUTPUT
AC Voltage Regulation (Batt.Mode) - 230VAC+/-5%
Surge Power - 16400VA
Efficiency (Peak) - 90% ~ 93%
Transfer Time - 15 ms (For Personal Computers) ; 20 ms (For Home Appliances)
Waveform - Pure sine wave
No Load Power Consumption - <70wW
DC Voltage (Optional) - 12 VDC +/- 5%,100W
BATTERY
Battery Voltage - 48 VDC
Floating Charge Voltage - 54 VDC
Overcharge Protection - 66 VDC
SOLAR CHARGER & AC CHARGER of Delta 8.2 Hybrid
Solar Charger Type – MPPT
Maximum PV Array Power – 8200W (4100W x 2)
MPPT Range @ Operating Voltage – 90 ~ 450 VDC
Maximum PV Array Open Circuit Voltage – 500 VDC
Maxmum Solar Charge Current – 120 A
Maximum AC Charge Current – 120 A
Maximum Charge Current – 120 A
PHYSICAL
Dimension, D x W x H (mm) – 147.4 x 432.5 x 553.6
Net Weight (kgs) – 18.4
Communication Interface – USB/RS232/RS485/WiFi/Dry-contact
OPERATING ENVIRONMENT
Humidity: 5% to 95% to Relative Humidity (Non-Condensing)
Operating Temperature – 10°C to 50°C
Storage Temperature – 15°C to 60°C
Compliance Safety – CE
| Beta 4.2 Hybrid Solar Inverter
Model name Beta 4.2KW
Max PV input Power - 6200
Rated output power - 4200
Maximum solar charger power - 140A
Grid Tie operation / PV input (DC)
Nominal DC voltage/ Max DC voltage - 360VvDC/500VDC
Start up Voltage/ Initial feeding voltage - 90DVC/120VDC
MPPT voltage range - 90-450VDC
Number of MPPT trackers / Max input current - 1/27A
Grid output (AC)
Nominal output voltage - 220/230/240VAC
output voltage range - 195-235VAC
Nominal output current - 18.2A
Power factor - 0.99
Feed-in Grid frequency range - 49Hz to 51Hz
Efficiency - 97%
Off-Grid operation / AC input
AC startup voltage / Auto restarting voltage - 120-140V
Acceptable input voltage range - 90-280VAC/ 170-280VAC
Maximum AC input Current - 30A
Nominal operating frequency 50/60Hz
Surge power - 8400VA
Off-Grid operation / PV input(DC)
Maximum DC voltage - 500vVDC
MPPT voltage range - 90-450VAC
Number of MPPT trackers / Max input current - (1/27)
Battery mode output AC
Nominal output voltage - 24V
Output wave form - Pure sin wave
Efficiency (DC to AC) - 94%
Battery & charger
Nominal DC voltage -24V
Maximum solar charger current - 140A
Maximum AC charging current - 100A
Physical features
Dimensions (D*Y*H) - 420 * 310 * 110
Net Weight (KGs) - 9.5
Interface - serial connection
communications - RS-232
Humidity - 0-90%
Operating temperature - (-10 to 50) | Specification
Max Power 13 Amps
Wait Time Adjustable from 15 Seconds to 3 Minutes
Ideal For All electrical and electronic equipment
Weight 500 gm
Dimensions 205 x 135 x 55mm
| Grovolt Ricco Plus 3.5KVA (24/48V)
* Pure Sine Wave Inverter
* Inbuilt With Transformer which is a strong load ability.
* Wide Charge Current 20-30A
* High-efficiency design & Power saving mode to conserve energy.
* Auto-restart when AC recovering.
* Smart battery charger design for optimized battery performance; With bypass /battery reverse protection / 6mill seconds transfer time / surge protection/input & output overload protection
DESCRIPTION
SPECIFICATIONS of Grovolt Ricco Plus 3.5KVA (24/48V)
Model name – RP-3500 AND RP-3548
Input
Capacity – 3500VA
Voltage (DC) – 24/48V
Nominal Voltage – 220VAC/110VAC
Voltage Range – 154-265VAC/77-135VAC
Frequency 50/60Hz (Auto sensing)
OUTPUT
Watt 800W | 1200W | 2000W | 2800W | 4000W | 4800W | 5200W | 6400W | 8000W
Voltage – 220VAC/110VAC
Frequency - 50Hz to 60Hz
Waveform – Pure Sinewave
Transfer time (AC to DC) <8ms
Transfer time (DC to AC) <8ms
Output Voltage Regulation 10%rms
Bypass Mode Yes
Save mode Yes
Efficiency >98%
PROTECTION
Input protection Circuit breaker
Output protection Circuit breaker
BATTERY
BATTERY TYPE AGM- Deep Cycle Gel
Up to 500Ah
Charging current 20/10A |30/15/7A | 48/24/12A | 30/15A | 40/20A | 45/22A | 50/25A | 35A | 50/25/12A
Low level disconnect (10V or 10.5V) × N N means the number of batteries in series
LCD INDICATOR STATUS Input AC/ Output AC
Battery DC, Output Load
Alarm, Fault
Battery Charge Level
Output Frequency
LED INDICATOR STATUS AC Line in: Green
Inverter: Green
Charging: Yellow
Alarm: Red
Grovolt Ricco Plus 3.5KVA (24/48V)
Battery low alarm battery light discharge 11.5V*N; battery load discharge 11.5V*N@load<20%
11V*N@load>50% / 10.5V*N@load>50%
Battery low recovery battery light discharge 11.5V*N; battery load discharge 11.5V*N@load<20%
11.5V*N@load>50% / 11V*N@load>50%
DC low voltage shutdown battery light discharge 11.5V*N; battery load discharge 11.5V*N@load<20%
10.5V*N@load>50% / 10.5V*N@load>50%
DC high Voltage alarm & fault 16V*N
DC high Voltage recovery 15V*N
ALARM
Low battery alarm Audible alarm -1 beeping per second
Overload alarm Audible alarm-continuous beeping
Fault Audible alarm-continuous beeping
ENVIRONMENT
Temperature - (0 - 40)
Humidity - CO-95% Non Condensing
Fault – >55db |
Reviews
There are no reviews yet.