| Content |
APC 800va EASY 230v Ups
Run time for load
Min-max: 45-450 W
Output Connections
(4) Universal receptacle (Battery Backup)
APC EASY UPS BV 800VA, AVR, Universal Outlet, 230V
Easy UPS provides power protection for unstable power conditions, ensuring consistent and reliable connectivity at the most critical moments.
Includes: User manual
Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
Battery backup and surge protection
Outlets provide abundant runtime for network gateway equipment and other critical low-power devices, allowing for hours of internet access during a power outage.
Battery and surge protected outlets
Back up and protect your hardware and data during power outages, surges and spikes .
LED Indicators
Provide easy-to-read status of the unit and utility power conditions.
Audible alarms
Provides notification of changing utility power and UPS power conditions
Cold-start capable
Provides temporary battery power when the utility power is out.
Boost Automatic Voltage Regulation (AVR)
Preserves battery life and maximizes runtime by correcting low voltages without discharging the battery.
APC 800va EASY 230v Ups Transformer-block spaced outlets
Protect equipment with input transformer blocks without blocking access to other receptacles.
Sleek design
Slim, modern design can be upright, flat, or wall-mounted to comfortably fit any electronics set-up and complement home décor.
Battery failure notification
APC 800va EASY 230v Ups Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Advanced Safety Features
Safeguard your Home UPS from overloads, excessive mains voltages, short circuits, installation mishaps and battery damage due to low voltage situations.
Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
United Arab Emirates, Albania, Armenia, Angola, Austria, Bosnia and Herzegovina, Belgium, Burkina Faso, Bulgaria, Benin, Bolivia, Botswana, Belarus, The Democratic Republic Of Congo, Switzerland, Côte d'Ivoire, Chile, Cameroon, Colombia, Serbia and Montenegro, Cyprus, Czech Republic, Germany, Denmark, Algeria, Estonia, Spain, Finland, France, Gabon, French Guiana, Ghana, Gambia, Guadeloupe, Greece, Hungary, Indonesia, Ireland, Israel, Iceland, Italy, Liberia, Lithuania, Luxembourg, Latvia, Morocco, Madagascar, Macedonia, Mali, Martinique, Mauritania, Malta, Mauritius, Malawi, Malaysia, Mozambique, Namibia, Nigeria, Netherlands, Norway, Peru, Philippines, Poland, Portugal, Paraguay, Reunion, Romania, Sweden, Singapore, Slovenia, Slovakia, Sierra Leone, Senegal, Suriname, Togo, Thailand, Tunisia, Uruguay, Vietnam, Mayotte, Zambia, Zimbabwe
Max Configurable Power (Watts)
Output Frequency (sync to mains)
50/60 Hz +/- 1 Hz Unsynchronised
Waveform type
Stepped approximation to a sinewave
Transfer Time
6 ms typical : 10 ms maximum
Input frequency
50/60 Hz +/- 5 Hz Auto-sensing
Input voltage range for main operations
Expected Battery Life (years)
Control panel
LED Status display with on line : on battery
Audible Alarm
Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm
Operating Relative Humidity
Storage Relative Humidity
Audible noise at 1 meter from surface of unit
Standard warranty
2 years repair or replace
| APC BACK-UPS 750VA 230V
SKU - BX750MI-MS
Brand - APC
Model - [BX750MI-MS] UPS “APC” Back-UPS 750VA, 230V, AVR, Universal Sockets
Output Power Capacity - 410 Watts / 750VA
Nominal Output Voltage - 230V
Topology - Line interactive
Output Connections - x2 Universal, x1 IEC 60320 C13
Nominal Input Voltage - 230V
Input Connections - (1) IEC 60320 C14 Inlets
Input Voltage Range for Main Operation - 140 – 300V , TOPOLOGY - Line Interactive
RUNTIME - 8.5 MINUTES (50% Load)
RESETABLE CIRCUIT BREAKER - YES
AVR - WITH AVR
RECHARGE TIME - 6 HOURS
BATTERY TYPE - Maintenance-free sealed Lead-Acid battery with suspended electrolyte
CONTROL PANEL - Visual LED indicators
SOFTWARE - Power Chute Personal Edition
Typical Recharge Time - 8hour(s)
Height - 160MM, 16.0CM
Width - 120MM, 12.0CM
Depth - 355MM, 35.5CM
Weight - 5.4KG | Grovolt Ricco Plus 5KVA
* Pure Sine Wave Inverter
* Inbuilt With Transformer which is a strong load ability.
* Wide Charge Current 20-30A
* High-efficiency design & Power saving mode to conserve energy.
* Auto-restart when AC recovering.
* Smart battery charger design for optimized battery performance; With bypass /battery reverse protection / 6mill seconds transfer time / surge protection/input & output overload protection
DESCRIPTION
SPECIFICATIONS of Grovolt Ricco Plus 5KVA
Model name – RP-50000
Input
Capacity – 5000VA
Voltage (DC) – 24/48V
Nominal Voltage – 220VAC/110VAC
Voltage Range – 154-265VAC/77-135VAC
Frequency 50/60Hz (Auto sensing)
OUTPUT
Watt 800W | 1200W | 2000W | 2800W | 4000W | 4800W | 5200W | 6400W | 8000W
Voltage – 220VAC/110VAC
Frequency - 50Hz to 60Hz
Waveform – Pure Sinewave
Transfer time (AC to DC) <8ms
Transfer time (DC to AC) <8ms
Output Voltage Regulation 10%rms
Bypass Mode Yes
Save mode Yes
Efficiency >98%
PROTECTION
Input protection Circuit breaker
Output protection Circuit breaker
BATTERY
BATTERY TYPE AGM- Deep Cycle Gel
Up to 500Ah
Charging current 20/10A |30/15/7A | 48/24/12A | 30/15A | 40/20A | 45/22A | 50/25A | 35A | 50/25/12A
Low level disconnect (10V or 10.5V) × N N means the number of batteries in series
LCD INDICATOR STATUS Input AC/ Output AC
Battery DC, Output Load
Alarm, Fault
Battery Charge Level
Output Frequency
LED INDICATOR STATUS AC Line in: Green
Inverter: Green
Charging: Yellow
Alarm: Red
Grovolt Ricco Plus 5KVA
Battery low alarm battery light discharge 11.5V*N; battery load discharge 11.5V*N@load<20%
11V*N@load>50% / 10.5V*N@load>50%
Battery low recovery battery light discharge 11.5V*N; battery load discharge 11.5V*N@load<20%
11.5V*N@load>50% / 11V*N@load>50%
DC low voltage shutdown battery light discharge 11.5V*N; battery load discharge 11.5V*N@load<20%
10.5V*N@load>50% / 10.5V*N@load>50%
DC high Voltage alarm & fault 16V*N
DC high Voltage recovery 15V*N
ALARM
Low battery alarm Audible alarm -1 beeping per second
Overload alarm Audible alarm-continuous beeping
Fault Audible alarm-continuous beeping
ENVIRONMENT
Temperature - (0 - 40)
Humidity - CO-95% Non Condensing
Fault – >55db | Beta 4.2 Hybrid Solar Inverter
Model name Beta 4.2KW
Max PV input Power - 6200
Rated output power - 4200
Maximum solar charger power - 140A
Grid Tie operation / PV input (DC)
Nominal DC voltage/ Max DC voltage - 360VvDC/500VDC
Start up Voltage/ Initial feeding voltage - 90DVC/120VDC
MPPT voltage range - 90-450VDC
Number of MPPT trackers / Max input current - 1/27A
Grid output (AC)
Nominal output voltage - 220/230/240VAC
output voltage range - 195-235VAC
Nominal output current - 18.2A
Power factor - 0.99
Feed-in Grid frequency range - 49Hz to 51Hz
Efficiency - 97%
Off-Grid operation / AC input
AC startup voltage / Auto restarting voltage - 120-140V
Acceptable input voltage range - 90-280VAC/ 170-280VAC
Maximum AC input Current - 30A
Nominal operating frequency 50/60Hz
Surge power - 8400VA
Off-Grid operation / PV input(DC)
Maximum DC voltage - 500vVDC
MPPT voltage range - 90-450VAC
Number of MPPT trackers / Max input current - (1/27)
Battery mode output AC
Nominal output voltage - 24V
Output wave form - Pure sin wave
Efficiency (DC to AC) - 94%
Battery & charger
Nominal DC voltage -24V
Maximum solar charger current - 140A
Maximum AC charging current - 100A
Physical features
Dimensions (D*Y*H) - 420 * 310 * 110
Net Weight (KGs) - 9.5
Interface - serial connection
communications - RS-232
Humidity - 0-90%
Operating temperature - (-10 to 50) | Grovolt Ricco Plus 3.5KVA (24/48V)
* Pure Sine Wave Inverter
* Inbuilt With Transformer which is a strong load ability.
* Wide Charge Current 20-30A
* High-efficiency design & Power saving mode to conserve energy.
* Auto-restart when AC recovering.
* Smart battery charger design for optimized battery performance; With bypass /battery reverse protection / 6mill seconds transfer time / surge protection/input & output overload protection
DESCRIPTION
SPECIFICATIONS of Grovolt Ricco Plus 3.5KVA (24/48V)
Model name – RP-3500 AND RP-3548
Input
Capacity – 3500VA
Voltage (DC) – 24/48V
Nominal Voltage – 220VAC/110VAC
Voltage Range – 154-265VAC/77-135VAC
Frequency 50/60Hz (Auto sensing)
OUTPUT
Watt 800W | 1200W | 2000W | 2800W | 4000W | 4800W | 5200W | 6400W | 8000W
Voltage – 220VAC/110VAC
Frequency - 50Hz to 60Hz
Waveform – Pure Sinewave
Transfer time (AC to DC) <8ms
Transfer time (DC to AC) <8ms
Output Voltage Regulation 10%rms
Bypass Mode Yes
Save mode Yes
Efficiency >98%
PROTECTION
Input protection Circuit breaker
Output protection Circuit breaker
BATTERY
BATTERY TYPE AGM- Deep Cycle Gel
Up to 500Ah
Charging current 20/10A |30/15/7A | 48/24/12A | 30/15A | 40/20A | 45/22A | 50/25A | 35A | 50/25/12A
Low level disconnect (10V or 10.5V) × N N means the number of batteries in series
LCD INDICATOR STATUS Input AC/ Output AC
Battery DC, Output Load
Alarm, Fault
Battery Charge Level
Output Frequency
LED INDICATOR STATUS AC Line in: Green
Inverter: Green
Charging: Yellow
Alarm: Red
Grovolt Ricco Plus 3.5KVA (24/48V)
Battery low alarm battery light discharge 11.5V*N; battery load discharge 11.5V*N@load<20%
11V*N@load>50% / 10.5V*N@load>50%
Battery low recovery battery light discharge 11.5V*N; battery load discharge 11.5V*N@load<20%
11.5V*N@load>50% / 11V*N@load>50%
DC low voltage shutdown battery light discharge 11.5V*N; battery load discharge 11.5V*N@load<20%
10.5V*N@load>50% / 10.5V*N@load>50%
DC high Voltage alarm & fault 16V*N
DC high Voltage recovery 15V*N
ALARM
Low battery alarm Audible alarm -1 beeping per second
Overload alarm Audible alarm-continuous beeping
Fault Audible alarm-continuous beeping
ENVIRONMENT
Temperature - (0 - 40)
Humidity - CO-95% Non Condensing
Fault – >55db | Blue Gate 1230VA UPS
Blue Gate 1230VA UPS (BG1230), which is a 1.23kva UPS, provides a power output rating of 720 watts,
Capable of supporting a set of office devices or some home appliances.
With the Blue Gate 1230VA UPS, you can be sure of power backup for the supported equipment, ensuring your work is protected in the event of sudden power failure.
It also enables you switch to alternative power supply, without sudden disruption.
The Blue Gate UPS is suitable for use with computers, workstations, printers and other equipment within its capacity.
At home, It can support your televisions, music system, decoder, PCs, internet modem, etc.
With the Blue Gate UPS brand, you can be sure of reliable UPS performance with good backup performance.
Blue Gate UPS also delivers the durability any user would expect.
Its advanced features mean you get quality performance and effective power backup.
Attribute of Blue Gate 1230VA UPS
- Line interactive design with higher efficiency
- Fully digitized microprocessor control
- High performance SMD technology
- Wide input voltage & frequency range
- Boost & buck AVR
- 3 LED indicators for monitoring
- Lightening & surge protection
- Short circuit & overload protection
- Energy saving function with UPS green mode
- Automatically charging in UPS off mode
- Automatically self-detection when start-up
- Auto restart while AC recovery
- Intelligent battery management
- RJ45, USB (optional)
|
Reviews
There are no reviews yet.