| Description | Àmųmà Plus 5KVA (48V)
- Model name – GA5048A
- Capacity (VA) – 5000VA
- Input Voltage (DC) – 48V
- Nominal Voltage – 220VAC
- Voltage Range – 154-265VAC (AC Model); 185-264VAC±3V(UPS Model)
- Frequency 50/60Hz (Auto sensing)
- Power Factor – 0.8
| Solar Charge Controller (40A)
Model: MPPT 40A
Max. Charge Current 40A
System Voltage: 12v/24v/36v/48v | Grovolt Ricco Plus 3.5KVA (24/48V)
* Pure Sine Wave Inverter
* Inbuilt With Transformer which is a strong load ability.
* Wide Charge Current 20-30A
* High-efficiency design & Power saving mode to conserve energy.
* Auto-restart when AC recovering. | Delta 8 Hybrid
• Operation Type: Off-Grid/On-Grid
• Sine wave Type: Pure, Power Factor 1.0
• Dual AC output for smart load management
• Battery Independent Design
• Wide PV input voltage range (90-450VDC)
• Built-in WiFi with IOS & Android APP
• Supports USB on the go function
• RGB Lightning for different working modes (Battery, Solar, Utility)
• With Parallel kits support up to 6 units | Solar Charge Controller (60A)
- Model: MPPT 60A
- Max. Charge Current 60A
- System Voltage: 12v/24v/36v/48v
| ORVAL TRI 10
• Pure SineWave Solar Inverter
• On-grid/Off-Grid.
• Output power Factor 1.0.
• Battery Independent Design
• Built-in 120A MPPT Solar charger.
• Wide PV input voltage range (90-450VDC).
• Built-in anti-dust kit.
• Smart battery charger design
• 3 phase in/3 phase out |
| Content | Àmųmà Plus 5KVA (48V)
• Support Lithium battery
• Support RS232 for WIFI (optional)
• Pure Sine Wave output
• Powerful Charge Rate Up to 90AMP
• DC Start & Automatic Self-Diagnostic Function
• High Efficiency Design & “Power Saving Mode” to Conserve Energy
• Auto restart when AC in recovering
• Smart battery charger design for optimized battery performance
• Selectable charging current based on applications
• AC input/DC input/Solar input optional priority
• Built-in Transformer
• Wall-Mounted
DESCRIPTION
SPECIFICATIONS
Model name – GA5048A
Capacity (VA) – 5000VA
Input Voltage (DC) – 48V
Nominal Voltage – 220VAC
Voltage Range – 154-265VAC (AC Model); 185-264VAC±3V(UPS Model)
Frequency 50/60Hz (Auto sensing)
Power Factor – 0.8
Rated Power 4000W
Voltage 220VAC
Frequency 50/60Hz
Waveform Pure Sinewave
Transfer time (AC to DC) <8ms
Transfer time (DC to AC) <8ms
Output Voltage Regulation ±10%
Bypass Mode Yes
Save mode Yes
Efficiency >98%
Input protection Circuit breaker
Output protection Circuit breaker
Battery Type AGM- Deep Cycle, Gel Up to 500Ah
Charging current 21A
Low Level disconnect (Selectable) 40V or 42V
PWM (Optional) Controller Voltage 30VDC - 60VDC
MPPT (Optional) Controller Voltage 30VDC - 60VDC
Maximum PV Array Power 3200W
Maximum PV Array Open circuit Voltage PWM: 150VDC, MPPT:150VDC
Maximum Solar Charge current 60A/100A
Protections Over load, Over temp, Over charging, Battery low, Battery reverse connect, High AC voltage etc
LCD Indicator Status AC Input Voltage, AC Input Frequency, PV Voltage, PV Current
Output Voltage, Output Frequency, Battery Voltage, Load current etc.
LED Indicator Status AC Line in: Green / Inverter: Green / Charging: Yellow / Alarm: Red
Low battery alarm Audible alarm -5 sounds beeping
Overload alarm Audible alarm-continuous beeping
Fault Audible alarm-continuous beeping
Temperature 0 – 40°C
Humidity -10°C-90°C Non Condensing
Accoustic Noise (db) >55dB
Size L*W*H (mm) 470*335*210MM
Weight 25.3 | Solar Charge Controller (40A)
Model: MPPT 40A
Max. Charge Current 40A
System Voltage: 12v/24v/36v/48v
Flexible
Max. PV Voltage (VoC): 150Vdc
Solar Operating Voltage: 20-150Vdc @12V
36-150Vdc @24v
48-150Vdc @36v
64-150Vdc @48v
PV Input Power: 12v: 540w
24v: 1080w
36v: 1620w
48v: 2180w
Operation Temperature -25~60°C | Grovolt Ricco Plus 3.5KVA (24/48V)
* Pure Sine Wave Inverter
* Inbuilt With Transformer which is a strong load ability.
* Wide Charge Current 20-30A
* High-efficiency design & Power saving mode to conserve energy.
* Auto-restart when AC recovering.
* Smart battery charger design for optimized battery performance; With bypass /battery reverse protection / 6mill seconds transfer time / surge protection/input & output overload protection
DESCRIPTION
SPECIFICATIONS of Grovolt Ricco Plus 3.5KVA (24/48V)
Model name – RP-3500 AND RP-3548
Input
Capacity – 3500VA
Voltage (DC) – 24/48V
Nominal Voltage – 220VAC/110VAC
Voltage Range – 154-265VAC/77-135VAC
Frequency 50/60Hz (Auto sensing)
OUTPUT
Watt 800W | 1200W | 2000W | 2800W | 4000W | 4800W | 5200W | 6400W | 8000W
Voltage – 220VAC/110VAC
Frequency - 50Hz to 60Hz
Waveform – Pure Sinewave
Transfer time (AC to DC) <8ms
Transfer time (DC to AC) <8ms
Output Voltage Regulation 10%rms
Bypass Mode Yes
Save mode Yes
Efficiency >98%
PROTECTION
Input protection Circuit breaker
Output protection Circuit breaker
BATTERY
BATTERY TYPE AGM- Deep Cycle Gel
Up to 500Ah
Charging current 20/10A |30/15/7A | 48/24/12A | 30/15A | 40/20A | 45/22A | 50/25A | 35A | 50/25/12A
Low level disconnect (10V or 10.5V) × N N means the number of batteries in series
LCD INDICATOR STATUS Input AC/ Output AC
Battery DC, Output Load
Alarm, Fault
Battery Charge Level
Output Frequency
LED INDICATOR STATUS AC Line in: Green
Inverter: Green
Charging: Yellow
Alarm: Red
Grovolt Ricco Plus 3.5KVA (24/48V)
Battery low alarm battery light discharge 11.5V*N; battery load discharge 11.5V*N@load<20%
11V*N@load>50% / 10.5V*N@load>50%
Battery low recovery battery light discharge 11.5V*N; battery load discharge 11.5V*N@load<20%
11.5V*N@load>50% / 11V*N@load>50%
DC low voltage shutdown battery light discharge 11.5V*N; battery load discharge 11.5V*N@load<20%
10.5V*N@load>50% / 10.5V*N@load>50%
DC high Voltage alarm & fault 16V*N
DC high Voltage recovery 15V*N
ALARM
Low battery alarm Audible alarm -1 beeping per second
Overload alarm Audible alarm-continuous beeping
Fault Audible alarm-continuous beeping
ENVIRONMENT
Temperature - (0 - 40)
Humidity - CO-95% Non Condensing
Fault – >55db | Delta 8.2 Hybrid
Technical features
MODEL Name - Delta 8.2
Model Number - ONY-I-D8.2-48
Rated Power - 8200VA/8200W
PARALLEL CAPABILITY - Yes, up to 6 units
Delta 8 Hybrid
• Operation Type: Off-Grid/On-Grid
• Sine wave Type: Pure, Power Factor 1.0
• Dual AC output for smart load management
• Battery Independent Design
• Wide PV input voltage range (90-450VDC)
• Built-in WiFi with IOS & Android APP
• Supports USB on the go function
• RGB Lightning for different working modes (Battery, Solar, Utility)
• With Parallel kits support up to 6 units
INPUT
Voltage - 230 VAC
Selectable Voltage Range - 170-280 VAC (For Personal Computers)/90-280 VAC (For Home Appliances)
Frequency Range - 50 Hz/60 Hz (Auto sensing)
OUTPUT
AC Voltage Regulation (Batt.Mode) - 230VAC+/-5%
Surge Power - 16400VA
Efficiency (Peak) - 90% ~ 93%
Transfer Time - 15 ms (For Personal Computers) ; 20 ms (For Home Appliances)
Waveform - Pure sine wave
No Load Power Consumption - <70wW
DC Voltage (Optional) - 12 VDC +/- 5%,100W
BATTERY
Battery Voltage - 48 VDC
Floating Charge Voltage - 54 VDC
Overcharge Protection - 66 VDC
SOLAR CHARGER & AC CHARGER of Delta 8.2 Hybrid
Solar Charger Type – MPPT
Maximum PV Array Power – 8200W (4100W x 2)
MPPT Range @ Operating Voltage – 90 ~ 450 VDC
Maximum PV Array Open Circuit Voltage – 500 VDC
Maxmum Solar Charge Current – 120 A
Maximum AC Charge Current – 120 A
Maximum Charge Current – 120 A
PHYSICAL
Dimension, D x W x H (mm) – 147.4 x 432.5 x 553.6
Net Weight (kgs) – 18.4
Communication Interface – USB/RS232/RS485/WiFi/Dry-contact
OPERATING ENVIRONMENT
Humidity: 5% to 95% to Relative Humidity (Non-Condensing)
Operating Temperature – 10°C to 50°C
Storage Temperature – 15°C to 60°C
Compliance Safety – CE
| Solar Charge Controller (60A)
Model: MPPT 60A
Max. Charge Current 60A
System Voltage: 12v/24v/36v/48v
Flexible
Max. PV Voltage (VoC): 150Vdc
Solar Operating Voltage: 20-150Vdc @12V
36-150Vdc @24v
48-150Vdc @36v
64-150Vdc @48v
PV Input Power: 12v: 800w
24v: 1600w
36v: 2400w
48v: 3200w
Operation Temperature -25~60°C | ORVAL TRI 10
DESCRIPTION
SPECIFICATIONS
Model name : TRI-10KW
Phase Type 3 Phase in / 3 Phase Out
Maximum PV input Power 14850W
Rated Output Power 10000W
Maximum Charging Power 9600W
Nominal DC Voltage /Maximum DC Voltage 720VDC / 900VDC
Start-up Voltage / Initial Feeding Voltage
MMPT Voltage Range 400VDC / 800VDC
Number of MPPT Trackers / Maximum Input Current 2/2* 18.6A
Nominal Output Voltage 230VAC (P-N), 400VAC (P-P)
Output Voltage Range 184VAC to 265VAC per phase
Nominal Output Current
Power Factor <0.99
European Efficiency 96%
Maximum Conversion Efficiency 96%
AC Startup Voltage / Auto Restart Voltage 120VAC to 140VAC P-P/ 180 VAC P-P
Acceptable Input Voltage Range 170VAC to 280VAC per phase
Maximum AC Input Current 40A
Maximum DC Voltage 900VDC
MPPT Voltage Range 400VDC to 800VDC
Number of MPPT Trackers / Maximum Input Current
Nominal Output Voltage 230VAC (P-N), 400VAC (P-P)
Output Waveform Pure Sinewave
Efficiency (DC to AC) 91%
Nominal DC Voltage /Maximum DC Voltage 720VDC / 900VDC
Start-up Voltage / Initial Feeding Voltage 320VDC / 350VDC
MPPT Voltage Range 400VDC / 800VDC
Number of MPPT Trackers / Maximum Input Current 2/2* 18.6A
Nominal Output Voltage 230VAC (P-N), 400VAC (P-P)
Output Voltage Range 184VAC to 265VAC Per Phase
Nominal Output Current 14.5A Per Phase
AC Startup Voltage / Auto Restart Voltage 120-140VAC P-P/ 180 VAC P-P
Acceptable Input Voltage Range 170 VAC to 280 VAC Per Phase
Maximum AC Input Current 40A
Nominal Output Voltage 230VAC (P-N), 400VAC (P-P)
Efficiency (DC to AC) 91%
Nominal DC Voltage 48VDC
Maximum Charging Current Default 60A, (10A to 200A adjustable)
Communication Port RS-232 / USB
Intelligent Slot Optional SNMP, Modbus and As400 Card
Dimensions (D*W*L: mm) and Weight (KG) 167.2*500*622, 40KG
Humidity 0 to 90% (non condensing
Operation temperature 0 to 55
Altitude 0 to 1000 Meter |
Reviews
There are no reviews yet.