Quality Àmųmà Plus 2KVA (12/24V) Off Grid Solar Inverter

Àmųmà Plus 2KVA (12/24V)

Model name – GA2024A
Capacity (VA) – 2000VA
Input Voltage (DC) – 12/24V
Nominal Voltage – 220VAC
Voltage Range – 154-265VAC (AC Model); 185-264VAC±3V(UPS Model)
Frequency 50/60Hz (Auto sensing)
Power Factor – 0.8

Àmųmà Plus 2KVA (12/24V)

• Support Lithium battery
• Support RS232 for WIFI (optional)
• Pure Sine Wave output
• Powerful Charge Rate Up to 90AMP
• DC Start & Automatic Self-Diagnostic Function
• High Efficiency Design & “Power Saving Mode” to Conserve Energy
• Auto restart when AC in recovering
• Smart battery charger design for optimized battery performance
• Selectable charging current based on applications
• AC input/DC input/Solar input optional priority
• Built-in Transformer
• Wall-Mounted

DESCRIPTION
SPECIFICATIONS

Model name – GA2024A
Capacity (VA) – 2000VA
Input Voltage (DC) – 12/24V
Nominal Voltage – 220VAC
Voltage Range – 154-265VAC (AC Model); 185-264VAC±3V(UPS Model)
Frequency 50/60Hz (Auto sensing)
Power Factor – 0.8

Rated Power 1600W
Voltage 220VAC
Frequency 50/60Hz
Waveform Pure Sinewave
Transfer time (AC to DC) <8ms
Transfer time (DC to AC) <8ms
Output Voltage Regulation ±10%
Bypass Mode Yes
Save mode Yes
Efficiency >98%
Input protection Circuit breaker
Output protection Circuit breaker
Battery Type AGM- Deep Cycle, Gel Up to 500Ah
Charging current 20A/30A
Low Level disconnect (Selectable) 20V or 21V
PWM (Optional) Controller Voltage
MPPT (Optional) Controller Voltage 15VDC – 30VDC
Maximum PV Array Power 1600W
Maximum PV Array Open circuit Voltage PWM: 105VDC, MPPT:150VDC
Maximum Solar Charge current 60A
Protections Over load, Over temp, Over charging, Battery low, Battery reverse connect, High AC voltage etc
LCD Indicator Status AC Input Voltage, AC Input Frequency, PV Voltage, PV Current
Output Voltage, Output Frequency, Battery Voltage, Load current etc.
LED Indicator Status AC Line in: Green / Inverter: Green / Charging: Yellow / Alarm: Red
Low battery alarm Audible alarm -5 sounds beeping
Overload alarm Audible alarm-continuous beeping
Fault Audible alarm-continuous beeping
Temperature 0 – 40°C
Humidity -10°C-90°C Non Condensing
Accoustic Noise (db) >55dB
Size L*W*H (mm) 470*335*210MM
Weight 17

Reviews

There are no reviews yet.

Average Rating

0

Rated 0 out of 5
0 Review
5 Star
NAN%
4 Star
NAN%
3 Star
NAN%
2 Star
NAN%
1 Star
NAN%
Be the first to review “Quality Àmųmà Plus 2KVA (12/24V) Off Grid Solar Inverter”

Your email address will not be published. Required fields are marked *

Vendor Information

  • Address: 32 Oba Akran Avenue Ogba Ikeja Lagos
    Lagos
    Lagos
    +234
  • 4.00 rating from 9 reviews

Quick Comparison

SettingsQuality Àmųmà Plus 2KVA (12/24V) Off Grid Solar Inverter removeQuality Grovolt Ricco Plus 2.5KVA(12/24/48v) removeQuality Solar Charge Controller (60A) removeQuality Grovolt Ricco Plus 3.5KVA (24/48V) removeQuality Àmųmà Plus 10KVA (48V) removeQuality Àmųmà Plus 5KVA (48V) Off Grid Solar Inverter remove
ImageÀmųmà Plus 2KVA (1224V)Quality Grovolt Ricco Plus 3.5KVA (24/48V)Solar Charge Controller (60AQuality Grovolt Ricco Plus 3.5KVA (24/48V)Àmųmà Plus 10KVA (48V)Àmųmà Plus 5KVA (48V)
SKU
Rating
Rated 0 out of 5
Rated 0 out of 5
Rated 0 out of 5
Rated 0 out of 5
Rated 0 out of 5
Rated 0 out of 5
Price
Stock
Availability
Add to cart

DescriptionÀmųmà Plus 2KVA (12/24V) Model name – GA2024A Capacity (VA) – 2000VA Input Voltage (DC) – 12/24V Nominal Voltage – 220VAC Voltage Range – 154-265VAC (AC Model); 185-264VAC±3V(UPS Model) Frequency 50/60Hz (Auto sensing) Power Factor – 0.8

Grovolt Ricco Plus 2.5KVA

* Pure Sine Wave Inverter * Inbuilt With Transformer which is a strong load ability. * Wide Charge Current 20-30A * High-efficiency design & Power saving mode to conserve energy. * Auto-restart when AC recovering.  

Solar Charge Controller (60A)

  • Model: MPPT 60A
  • Max. Charge Current 60A
  • System Voltage: 12v/24v/36v/48v

Grovolt Ricco Plus 3.5KVA (24/48V)

* Pure Sine Wave Inverter * Inbuilt With Transformer which is a strong load ability. * Wide Charge Current 20-30A * High-efficiency design & Power saving mode to conserve energy. * Auto-restart when AC recovering.
Àmųmà Plus 10KVA (48V) • Support Lithium battery • Support RS232 for WIFI (optional) • Pure Sine Wave output • Powerful Charge Rate Up to 90AMP • DC Start & Automatic Self-Diagnostic Function • High Efficiency Design & “Power Saving Mode” to Conserve Energy • Auto restart when AC in recovering • Smart battery charger design for optimized battery performance • Selectable charging current based on applications • AC input/DC input/Solar input optional priority • Built-in Transformer • Wall-Mounted

Àmųmà Plus 5KVA (48V)

  • Model name – GA5048A
  • Capacity (VA) – 5000VA
  • Input Voltage (DC) – 48V
  • Nominal Voltage – 220VAC
  • Voltage Range – 154-265VAC (AC Model); 185-264VAC±3V(UPS Model)
  • Frequency 50/60Hz (Auto sensing)
  • Power Factor – 0.8
ContentÀmųmà Plus 2KVA (12/24V) • Support Lithium battery • Support RS232 for WIFI (optional) • Pure Sine Wave output • Powerful Charge Rate Up to 90AMP • DC Start & Automatic Self-Diagnostic Function • High Efficiency Design & “Power Saving Mode” to Conserve Energy • Auto restart when AC in recovering • Smart battery charger design for optimized battery performance • Selectable charging current based on applications • AC input/DC input/Solar input optional priority • Built-in Transformer • Wall-Mounted DESCRIPTION SPECIFICATIONS Model name – GA2024A Capacity (VA) – 2000VA Input Voltage (DC) – 12/24V Nominal Voltage – 220VAC Voltage Range – 154-265VAC (AC Model); 185-264VAC±3V(UPS Model) Frequency 50/60Hz (Auto sensing) Power Factor – 0.8 Rated Power 1600W Voltage 220VAC Frequency 50/60Hz Waveform Pure Sinewave Transfer time (AC to DC) <8ms Transfer time (DC to AC) <8ms Output Voltage Regulation ±10% Bypass Mode Yes Save mode Yes Efficiency >98% Input protection Circuit breaker Output protection Circuit breaker Battery Type AGM- Deep Cycle, Gel Up to 500Ah Charging current 20A/30A Low Level disconnect (Selectable) 20V or 21V PWM (Optional) Controller Voltage MPPT (Optional) Controller Voltage 15VDC - 30VDC Maximum PV Array Power 1600W Maximum PV Array Open circuit Voltage PWM: 105VDC, MPPT:150VDC Maximum Solar Charge current 60A Protections Over load, Over temp, Over charging, Battery low, Battery reverse connect, High AC voltage etc LCD Indicator Status AC Input Voltage, AC Input Frequency, PV Voltage, PV Current Output Voltage, Output Frequency, Battery Voltage, Load current etc. LED Indicator Status AC Line in: Green / Inverter: Green / Charging: Yellow / Alarm: Red Low battery alarm Audible alarm -5 sounds beeping Overload alarm Audible alarm-continuous beeping Fault Audible alarm-continuous beeping Temperature 0 – 40°C Humidity -10°C-90°C Non Condensing Accoustic Noise (db) >55dB Size L*W*H (mm) 470*335*210MM Weight 17

GROVALT RICCO PLUS 2.5KVA

Grovolt Ricco Plus 2.5KVA (12/24/48V) Off Grid Solar Inverter * Pure Sine Wave Inverter * Inbuilt With Transformer which is a strong load ability. * Wide Charge Current 20-30A * High-efficiency design & Power saving mode to conserve energy. * Auto-restart when AC recovering. * Smart battery charger design for optimized battery performance; With bypass /battery reverse protection / 6mill seconds transfer time / surge protection/input & output overload protection DESCRIPTION SPECIFICATIONS of GROVALT RICCO PLUS 2.5KVA Model name – RP-2500 Input Capacity – 2500VA Voltage (DC) – 12/24/48V Nominal Voltage – 220VAC/110VAC Voltage Range – 154-265VAC/77-135VAC Frequency 50/60Hz (Auto sensing) OUTPUT Watt 800W | 1200W | 2000W | 2800W | 4000W | 4800W | 5200W | 6400W | 8000W Voltage – 220VAC/110VAC Frequency - 50Hz to 60Hz Waveform – Pure Sinewave Transfer time (AC to DC) <8ms Transfer time (DC to AC) <8ms Output Voltage Regulation 10%rms Bypass Mode Yes Save mode Yes Efficiency >98% PROTECTION Input protection Circuit breaker Output protection Circuit breaker BATTERY BATTERY TYPE AGM- Deep Cycle Gel Up to 500Ah Charging current 20/10A |30/15/7A | 48/24/12A | 30/15A | 40/20A | 45/22A | 50/25A | 35A | 50/25/12A Low level disconnect (10V or 10.5V) × N N means the number of batteries in series LCD INDICATOR STATUS Input AC/ Output AC Battery DC, Output Load Alarm, Fault Battery Charge Level Output Frequency LED INDICATOR STATUS AC Line in: Green Inverter: Green Charging: Yellow Alarm: Red GROVALT RICCO PLUS 2.5KVA                                                                                                                                                                                                                                                   Battery low alarm battery light discharge 11.5V*N; battery load discharge 11.5V*N@load<20% 11V*N@load>50% / 10.5V*N@load>50% Battery low recovery battery light discharge 11.5V*N; battery load discharge 11.5V*N@load<20% 11.5V*N@load>50% / 11V*N@load>50% DC low voltage shutdown battery light discharge 11.5V*N; battery load discharge 11.5V*N@load<20% 10.5V*N@load>50% / 10.5V*N@load>50% DC high Voltage alarm & fault 16V*N DC high Voltage recovery 15V*N ALARM Low battery alarm Audible alarm -1 beeping per second Overload alarm Audible alarm-continuous beeping Fault Audible alarm-continuous beeping ENVIRONMENT Temperature - (0 - 40) Humidity - CO-95% Non Condensing Fault – >55db

Solar Charge Controller (60A)

Model: MPPT 60A Max. Charge Current 60A System Voltage: 12v/24v/36v/48v Flexible Max. PV Voltage (VoC): 150Vdc Solar Operating Voltage: 20-150Vdc @12V 36-150Vdc @24v 48-150Vdc @36v 64-150Vdc @48v PV Input Power: 12v: 800w 24v: 1600w 36v: 2400w 48v: 3200w Operation Temperature -25~60°C

Grovolt Ricco Plus 3.5KVA (24/48V)

* Pure Sine Wave Inverter * Inbuilt With Transformer which is a strong load ability. * Wide Charge Current 20-30A * High-efficiency design & Power saving mode to conserve energy. * Auto-restart when AC recovering. * Smart battery charger design for optimized battery performance; With bypass /battery reverse protection / 6mill seconds transfer time / surge protection/input & output overload protection DESCRIPTION SPECIFICATIONS of Grovolt Ricco Plus 3.5KVA (24/48V) Model name – RP-3500 AND RP-3548 Input Capacity – 3500VA Voltage (DC) – 24/48V Nominal Voltage – 220VAC/110VAC Voltage Range – 154-265VAC/77-135VAC Frequency 50/60Hz (Auto sensing) OUTPUT Watt 800W | 1200W | 2000W | 2800W | 4000W | 4800W | 5200W | 6400W | 8000W Voltage – 220VAC/110VAC Frequency - 50Hz to 60Hz Waveform – Pure Sinewave Transfer time (AC to DC) <8ms Transfer time (DC to AC) <8ms Output Voltage Regulation 10%rms Bypass Mode Yes Save mode Yes Efficiency >98% PROTECTION Input protection Circuit breaker Output protection Circuit breaker BATTERY BATTERY TYPE AGM- Deep Cycle Gel Up to 500Ah Charging current 20/10A |30/15/7A | 48/24/12A | 30/15A | 40/20A | 45/22A | 50/25A | 35A | 50/25/12A Low level disconnect (10V or 10.5V) × N N means the number of batteries in series LCD INDICATOR STATUS Input AC/ Output AC Battery DC, Output Load Alarm, Fault Battery Charge Level Output Frequency LED INDICATOR STATUS AC Line in: Green Inverter: Green Charging: Yellow Alarm: Red Grovolt Ricco Plus 3.5KVA (24/48V) Battery low alarm battery light discharge 11.5V*N; battery load discharge 11.5V*N@load<20% 11V*N@load>50% / 10.5V*N@load>50% Battery low recovery battery light discharge 11.5V*N; battery load discharge 11.5V*N@load<20% 11.5V*N@load>50% / 11V*N@load>50% DC low voltage shutdown battery light discharge 11.5V*N; battery load discharge 11.5V*N@load<20% 10.5V*N@load>50% / 10.5V*N@load>50% DC high Voltage alarm & fault 16V*N DC high Voltage recovery 15V*N ALARM Low battery alarm Audible alarm -1 beeping per second Overload alarm Audible alarm-continuous beeping Fault Audible alarm-continuous beeping ENVIRONMENT Temperature - (0 - 40) Humidity - CO-95% Non Condensing Fault – >55db
Àmųmà Plus 10KVA (48V) Specification Of Àmųmà Plus 10KVA (48V) Model name – GA10048A Capacity (VA) – 10000VA Input Voltage (DC) – 48V Nominal Voltage – 220VAC Voltage Range – 154-265VAC (AC Model); 185-264VAC±3V(UPS Model) Frequency - 50/60Hz (Auto sensing) Power Factor – 0.8 Rated Power: 8000W Voltage: 220VAC Frequency: 50/60Hz Waveform: Pure SineWave Transfer time (AC to DC): <8ms Transfer time (DC to AC): <8ms Output Voltage Regulation: ±10% Bypass Mode: Yes Save mode: Yes Efficiency: >98% Input protection: Circuit breaker Output protection: Circuit breaker Battery Type: AGM- Deep Cycle, Gel Up to 500Ah Charging current: 42A Low Level disconnect (Selectable): 40V or 42V PWM (Optional) Controller Voltage: 30VDC – 60VDC MPPT (Optional) Controller Voltage: 30VDC – 150VDC Maximum PV Array Power: 3200W Maximum PV Array Open circuit Voltage: MPPT:150VDC Maximum Solar Charge current: 100A Protections: Over load, Over temp, Over charging, Battery low, Battery reverse connect, High AC voltage etc LCD Indicator Status: AC Input Voltage, AC Input Frequency, PV Voltage, PV Current Output Voltage, Output Frequency, Battery Voltage, Load current etc. LED Indicator Status: AC Line in: Green / Inverter: Green / Charging: Yellow / Alarm: Red Low battery alarm: Audible alarm -5 seconds beeping Overload alarm: Audible alarm-continuous beeping Fault: Audible alarm-continuous beeping Temperature: 0 – 40°C Humidity -10°C-90°C Non Condensing Accoustic Noise (db): >55dB Size L*W*H (mm): 470*335*210MM Weight: 40  

Àmųmà Plus 5KVA (48V)

• Support Lithium battery • Support RS232 for WIFI (optional) • Pure Sine Wave output • Powerful Charge Rate Up to 90AMP • DC Start & Automatic Self-Diagnostic Function • High Efficiency Design & “Power Saving Mode” to Conserve Energy • Auto restart when AC in recovering • Smart battery charger design for optimized battery performance • Selectable charging current based on applications • AC input/DC input/Solar input optional priority • Built-in Transformer • Wall-Mounted DESCRIPTION SPECIFICATIONS Model name – GA5048A Capacity (VA) – 5000VA Input Voltage (DC) – 48V Nominal Voltage – 220VAC Voltage Range – 154-265VAC (AC Model); 185-264VAC±3V(UPS Model) Frequency 50/60Hz (Auto sensing) Power Factor – 0.8 Rated Power 4000W Voltage 220VAC Frequency 50/60Hz Waveform Pure Sinewave Transfer time (AC to DC) <8ms Transfer time (DC to AC) <8ms Output Voltage Regulation ±10% Bypass Mode Yes Save mode Yes Efficiency >98% Input protection Circuit breaker Output protection Circuit breaker Battery Type AGM- Deep Cycle, Gel Up to 500Ah Charging current 21A Low Level disconnect (Selectable) 40V or 42V PWM (Optional) Controller Voltage 30VDC - 60VDC MPPT (Optional) Controller Voltage 30VDC - 60VDC Maximum PV Array Power 3200W Maximum PV Array Open circuit Voltage PWM: 150VDC, MPPT:150VDC Maximum Solar Charge current 60A/100A Protections Over load, Over temp, Over charging, Battery low, Battery reverse connect, High AC voltage etc LCD Indicator Status AC Input Voltage, AC Input Frequency, PV Voltage, PV Current Output Voltage, Output Frequency, Battery Voltage, Load current etc. LED Indicator Status AC Line in: Green / Inverter: Green / Charging: Yellow / Alarm: Red Low battery alarm Audible alarm -5 sounds beeping Overload alarm Audible alarm-continuous beeping Fault Audible alarm-continuous beeping Temperature 0 – 40°C Humidity -10°C-90°C Non Condensing Accoustic Noise (db) >55dB Size L*W*H (mm) 470*335*210MM Weight 25.3
Weight
DimensionsN/AN/AN/AN/AN/AN/A
Additional information