Quality Àmųmà Plus 10KVA (48V)

Àmųmà Plus 10KVA (48V)

• Support Lithium battery
• Support RS232 for WIFI (optional)
• Pure Sine Wave output
• Powerful Charge Rate Up to 90AMP
• DC Start & Automatic Self-Diagnostic Function
• High Efficiency Design & “Power Saving Mode” to Conserve Energy
• Auto restart when AC in recovering
• Smart battery charger design for optimized battery performance
• Selectable charging current based on applications
• AC input/DC input/Solar input optional priority
• Built-in Transformer
• Wall-Mounted

Category:

Àmųmà Plus 10KVA (48V)

Specification Of Àmųmà Plus 10KVA (48V)

Model name – GA10048A
Capacity (VA) – 10000VA
Input Voltage (DC) – 48V
Nominal Voltage – 220VAC
Voltage Range – 154-265VAC (AC Model); 185-264VAC±3V(UPS Model)
Frequency – 50/60Hz (Auto sensing)
Power Factor – 0.8

Rated Power: 8000W
Voltage: 220VAC
Frequency: 50/60Hz
Waveform: Pure SineWave
Transfer time (AC to DC): <8ms
Transfer time (DC to AC): <8ms
Output Voltage Regulation: ±10%
Bypass Mode: Yes
Save mode: Yes
Efficiency: >98%
Input protection: Circuit breaker
Output protection: Circuit breaker
Battery Type: AGM- Deep Cycle, Gel Up to 500Ah
Charging current: 42A
Low Level disconnect (Selectable): 40V or 42V
PWM (Optional) Controller Voltage: 30VDC – 60VDC
MPPT (Optional) Controller Voltage: 30VDC – 150VDC
Maximum PV Array Power: 3200W
Maximum PV Array Open circuit Voltage: MPPT:150VDC
Maximum Solar Charge current: 100A
Protections: Over load, Over temp, Over charging, Battery low, Battery reverse connect, High AC voltage etc
LCD Indicator Status: AC Input Voltage, AC Input Frequency, PV Voltage, PV Current
Output Voltage, Output Frequency, Battery Voltage, Load current etc.
LED Indicator Status: AC Line in: Green / Inverter: Green / Charging: Yellow / Alarm: Red
Low battery alarm: Audible alarm -5 seconds beeping
Overload alarm: Audible alarm-continuous beeping
Fault: Audible alarm-continuous beeping
Temperature: 0 – 40°C
Humidity -10°C-90°C Non Condensing
Accoustic Noise (db): >55dB
Size L*W*H (mm): 470*335*210MM
Weight: 40

 

Reviews

There are no reviews yet.

Average Rating

0

Rated 0 out of 5
0 Review
5 Star
NAN%
4 Star
NAN%
3 Star
NAN%
2 Star
NAN%
1 Star
NAN%
Be the first to review “Quality Àmųmà Plus 10KVA (48V)”

Your email address will not be published. Required fields are marked *

Vendor Information

  • Address: 32 Oba Akran Avenue Ogba Ikeja Lagos
    Lagos
    Lagos
    +234
  • 4.00 rating from 9 reviews

Quick Comparison

SettingsQuality Àmųmà Plus 10KVA (48V) removeQuality Grovolt Ricco Plus 2.5KVA(12/24/48v) removeQuality Delta 8.2 Hybrid Solar Inverter removeQuality Àmųmà Plus 2KVA (12/24V) Off Grid Solar Inverter removeQuality SOLAR CHARGE CONTROLLER (80A) removeQuality RAGNAR 11 PRO 11KVA/11,000W remove
ImageÀmųmà Plus 10KVA (48V)Quality Grovolt Ricco Plus 3.5KVA (24/48V)Quality Delta 8.2 Hybrid Solar InverterÀmųmà Plus 2KVA (1224V)SOLAR CHARGE CONTROLLER (80A)RAGNAR 11 PRO
SKU
Rating
Rated 0 out of 5
Rated 0 out of 5
Rated 0 out of 5
Rated 0 out of 5
Rated 0 out of 5
Rated 0 out of 5
Price
Stock
Availability
Add to cart

DescriptionÀmųmà Plus 10KVA (48V) • Support Lithium battery • Support RS232 for WIFI (optional) • Pure Sine Wave output • Powerful Charge Rate Up to 90AMP • DC Start & Automatic Self-Diagnostic Function • High Efficiency Design & “Power Saving Mode” to Conserve Energy • Auto restart when AC in recovering • Smart battery charger design for optimized battery performance • Selectable charging current based on applications • AC input/DC input/Solar input optional priority • Built-in Transformer • Wall-Mounted

Grovolt Ricco Plus 2.5KVA

* Pure Sine Wave Inverter * Inbuilt With Transformer which is a strong load ability. * Wide Charge Current 20-30A * High-efficiency design & Power saving mode to conserve energy. * Auto-restart when AC recovering.  
Delta 8 Hybrid • Operation Type: Off-Grid/On-Grid • Sine wave Type: Pure, Power Factor 1.0 • Dual AC output for smart load management • Battery Independent Design • Wide PV input voltage range (90-450VDC) • Built-in WiFi with IOS & Android APP • Supports USB on the go function • RGB Lightning for different working modes (Battery, Solar, Utility) • With Parallel kits support up to 6 unitsÀmųmà Plus 2KVA (12/24V) Model name – GA2024A Capacity (VA) – 2000VA Input Voltage (DC) – 12/24V Nominal Voltage – 220VAC Voltage Range – 154-265VAC (AC Model); 185-264VAC±3V(UPS Model) Frequency 50/60Hz (Auto sensing) Power Factor – 0.8SOLAR CHARGE CONTROLLER (80A)
  • Model: MPPT 80A
  • Max. Charge Current:80A
  • System Voltage:12v/24v/36v/48v
RAGNAR 11 PRO * Dual outputs for smart load management. * Maximum PV Input current up to 27A. * Wide PV input voltage range (90-450VDC). * Battery Independent Design. * Built-in 150A MPPT Solar charger. * Built-in Wi-FI with IOS & Android App. * Smart battery charger design. * Supports USB On-the-Go function. * Selectable high-power charging current. * Built-in DC output for DC fan, LED bulb, router * RGB lighting for different working modes. * Built-in parallel kit support parallels up to 6 Units.
ContentÀmųmà Plus 10KVA (48V) Specification Of Àmųmà Plus 10KVA (48V) Model name – GA10048A Capacity (VA) – 10000VA Input Voltage (DC) – 48V Nominal Voltage – 220VAC Voltage Range – 154-265VAC (AC Model); 185-264VAC±3V(UPS Model) Frequency - 50/60Hz (Auto sensing) Power Factor – 0.8 Rated Power: 8000W Voltage: 220VAC Frequency: 50/60Hz Waveform: Pure SineWave Transfer time (AC to DC): <8ms Transfer time (DC to AC): <8ms Output Voltage Regulation: ±10% Bypass Mode: Yes Save mode: Yes Efficiency: >98% Input protection: Circuit breaker Output protection: Circuit breaker Battery Type: AGM- Deep Cycle, Gel Up to 500Ah Charging current: 42A Low Level disconnect (Selectable): 40V or 42V PWM (Optional) Controller Voltage: 30VDC – 60VDC MPPT (Optional) Controller Voltage: 30VDC – 150VDC Maximum PV Array Power: 3200W Maximum PV Array Open circuit Voltage: MPPT:150VDC Maximum Solar Charge current: 100A Protections: Over load, Over temp, Over charging, Battery low, Battery reverse connect, High AC voltage etc LCD Indicator Status: AC Input Voltage, AC Input Frequency, PV Voltage, PV Current Output Voltage, Output Frequency, Battery Voltage, Load current etc. LED Indicator Status: AC Line in: Green / Inverter: Green / Charging: Yellow / Alarm: Red Low battery alarm: Audible alarm -5 seconds beeping Overload alarm: Audible alarm-continuous beeping Fault: Audible alarm-continuous beeping Temperature: 0 – 40°C Humidity -10°C-90°C Non Condensing Accoustic Noise (db): >55dB Size L*W*H (mm): 470*335*210MM Weight: 40  

GROVALT RICCO PLUS 2.5KVA

Grovolt Ricco Plus 2.5KVA (12/24/48V) Off Grid Solar Inverter * Pure Sine Wave Inverter * Inbuilt With Transformer which is a strong load ability. * Wide Charge Current 20-30A * High-efficiency design & Power saving mode to conserve energy. * Auto-restart when AC recovering. * Smart battery charger design for optimized battery performance; With bypass /battery reverse protection / 6mill seconds transfer time / surge protection/input & output overload protection DESCRIPTION SPECIFICATIONS of GROVALT RICCO PLUS 2.5KVA Model name – RP-2500 Input Capacity – 2500VA Voltage (DC) – 12/24/48V Nominal Voltage – 220VAC/110VAC Voltage Range – 154-265VAC/77-135VAC Frequency 50/60Hz (Auto sensing) OUTPUT Watt 800W | 1200W | 2000W | 2800W | 4000W | 4800W | 5200W | 6400W | 8000W Voltage – 220VAC/110VAC Frequency - 50Hz to 60Hz Waveform – Pure Sinewave Transfer time (AC to DC) <8ms Transfer time (DC to AC) <8ms Output Voltage Regulation 10%rms Bypass Mode Yes Save mode Yes Efficiency >98% PROTECTION Input protection Circuit breaker Output protection Circuit breaker BATTERY BATTERY TYPE AGM- Deep Cycle Gel Up to 500Ah Charging current 20/10A |30/15/7A | 48/24/12A | 30/15A | 40/20A | 45/22A | 50/25A | 35A | 50/25/12A Low level disconnect (10V or 10.5V) × N N means the number of batteries in series LCD INDICATOR STATUS Input AC/ Output AC Battery DC, Output Load Alarm, Fault Battery Charge Level Output Frequency LED INDICATOR STATUS AC Line in: Green Inverter: Green Charging: Yellow Alarm: Red GROVALT RICCO PLUS 2.5KVA                                                                                                                                                                                                                                                   Battery low alarm battery light discharge 11.5V*N; battery load discharge 11.5V*N@load<20% 11V*N@load>50% / 10.5V*N@load>50% Battery low recovery battery light discharge 11.5V*N; battery load discharge 11.5V*N@load<20% 11.5V*N@load>50% / 11V*N@load>50% DC low voltage shutdown battery light discharge 11.5V*N; battery load discharge 11.5V*N@load<20% 10.5V*N@load>50% / 10.5V*N@load>50% DC high Voltage alarm & fault 16V*N DC high Voltage recovery 15V*N ALARM Low battery alarm Audible alarm -1 beeping per second Overload alarm Audible alarm-continuous beeping Fault Audible alarm-continuous beeping ENVIRONMENT Temperature - (0 - 40) Humidity - CO-95% Non Condensing Fault – >55db

Delta 8.2 Hybrid

Technical features MODEL Name - Delta 8.2 Model Number - ONY-I-D8.2-48 Rated Power - 8200VA/8200W PARALLEL CAPABILITY - Yes, up to 6 units Delta 8 Hybrid • Operation Type: Off-Grid/On-Grid • Sine wave Type: Pure, Power Factor 1.0 • Dual AC output for smart load management • Battery Independent Design • Wide PV input voltage range (90-450VDC) • Built-in WiFi with IOS & Android APP • Supports USB on the go function • RGB Lightning for different working modes (Battery, Solar, Utility) • With Parallel kits support up to 6 units INPUT Voltage - 230 VAC Selectable Voltage Range - 170-280 VAC (For Personal Computers)/90-280 VAC (For Home Appliances) Frequency Range - 50 Hz/60 Hz (Auto sensing) OUTPUT AC Voltage Regulation (Batt.Mode) - 230VAC+/-5% Surge Power - 16400VA Efficiency (Peak) - 90% ~ 93% Transfer Time - 15 ms (For Personal Computers) ; 20 ms (For Home Appliances) Waveform - Pure sine wave No Load Power Consumption - <70wW DC Voltage (Optional) - 12 VDC +/- 5%,100W BATTERY Battery Voltage - 48 VDC Floating Charge Voltage - 54 VDC Overcharge Protection - 66 VDC SOLAR CHARGER & AC CHARGER of Delta 8.2 Hybrid Solar Charger Type – MPPT Maximum PV Array Power – 8200W (4100W x 2) MPPT Range @ Operating Voltage – 90 ~ 450 VDC Maximum PV Array Open Circuit Voltage – 500 VDC Maxmum Solar Charge Current – 120 A Maximum AC Charge Current – 120 A Maximum Charge Current – 120 A PHYSICAL Dimension, D x W x H (mm) – 147.4 x 432.5 x 553.6 Net Weight (kgs) – 18.4 Communication Interface – USB/RS232/RS485/WiFi/Dry-contact OPERATING ENVIRONMENT Humidity: 5% to 95% to Relative Humidity (Non-Condensing) Operating Temperature – 10°C to 50°C Storage Temperature – 15°C to 60°C Compliance Safety – CE  
Àmųmà Plus 2KVA (12/24V) • Support Lithium battery • Support RS232 for WIFI (optional) • Pure Sine Wave output • Powerful Charge Rate Up to 90AMP • DC Start & Automatic Self-Diagnostic Function • High Efficiency Design & “Power Saving Mode” to Conserve Energy • Auto restart when AC in recovering • Smart battery charger design for optimized battery performance • Selectable charging current based on applications • AC input/DC input/Solar input optional priority • Built-in Transformer • Wall-Mounted DESCRIPTION SPECIFICATIONS Model name – GA2024A Capacity (VA) – 2000VA Input Voltage (DC) – 12/24V Nominal Voltage – 220VAC Voltage Range – 154-265VAC (AC Model); 185-264VAC±3V(UPS Model) Frequency 50/60Hz (Auto sensing) Power Factor – 0.8 Rated Power 1600W Voltage 220VAC Frequency 50/60Hz Waveform Pure Sinewave Transfer time (AC to DC) <8ms Transfer time (DC to AC) <8ms Output Voltage Regulation ±10% Bypass Mode Yes Save mode Yes Efficiency >98% Input protection Circuit breaker Output protection Circuit breaker Battery Type AGM- Deep Cycle, Gel Up to 500Ah Charging current 20A/30A Low Level disconnect (Selectable) 20V or 21V PWM (Optional) Controller Voltage MPPT (Optional) Controller Voltage 15VDC - 30VDC Maximum PV Array Power 1600W Maximum PV Array Open circuit Voltage PWM: 105VDC, MPPT:150VDC Maximum Solar Charge current 60A Protections Over load, Over temp, Over charging, Battery low, Battery reverse connect, High AC voltage etc LCD Indicator Status AC Input Voltage, AC Input Frequency, PV Voltage, PV Current Output Voltage, Output Frequency, Battery Voltage, Load current etc. LED Indicator Status AC Line in: Green / Inverter: Green / Charging: Yellow / Alarm: Red Low battery alarm Audible alarm -5 sounds beeping Overload alarm Audible alarm-continuous beeping Fault Audible alarm-continuous beeping Temperature 0 – 40°C Humidity -10°C-90°C Non Condensing Accoustic Noise (db) >55dB Size L*W*H (mm) 470*335*210MM Weight 17SOLAR CHARGE CONTROLLER (80A) Model: MPPT 80A Max. Charge Current:80A System Voltage:12v/24v/36v/48v Flexible Max. PV Voltage (VoC):150Vdc Solar Operating Voltage: 20-150Vdc @12V 36-150Vdc @24v 48-150Vdc @36v 64-150Vdc @48v PV Input Power:12v: 1040w 24v: 2080w 36v: 3120w 48v: 4160w Operation Temperature-25~60°CRAGNAR 11 PRO DESCRIPTION SPECIFICATIONS of RAGNAR 11 PRO Model name Ragnar 11kw Model Number Model Number Maximum PV Input Power 11000W Rated Output Power 11000W AC INPUT Nominal Input Voltage 230VAC Selectable Input AC Voltage range 170-280VAC (Computers)/90-280VAC (Appliances) Frequency range 50Hz/60Hz (Auto sensing) AC OUTPUT AC Voltage Regulation (Battery Mode) 230VAC +/-5% Surge Power 22000W Efficiency 93% Transfer Time 10ms for computers/20ms for Appliances Output voltage waveform Pure Sinewave Optional DC voltage 12VDC +/-5% (100W) BATTERY Battery Voltage 48VDC Floating charge voltage 54VDC Overchange protection 63VDC SOLAR / CHARGING MODE Solar charger type MPPT Maximum PV array open circuit voltage 11000W (2*5500) Maximum PV input current 500VDC Maximum solar charging current 150A Maximum AC solar charging current 150A Maximum AC solar charging current 150A PHYSICAL Dimensions (D*W*H)mm 158.4*503.6*530.8 Communications Interface USB/RS232/RS485/Wi-Fi/Dry Contact Net weight (Kgs) 20 Kgs Gross weight (Kgs) 20 Kgs Device Color Black & Red
Weight
DimensionsN/AN/AN/AN/AN/AN/A
Additional information