Description | Àmųmà Plus 10KVA (48V)
• Support Lithium battery
• Support RS232 for WIFI (optional)
• Pure Sine Wave output
• Powerful Charge Rate Up to 90AMP
• DC Start & Automatic Self-Diagnostic Function
• High Efficiency Design & “Power Saving Mode” to Conserve Energy
• Auto restart when AC in recovering
• Smart battery charger design for optimized battery performance
• Selectable charging current based on applications
• AC input/DC input/Solar input optional priority
• Built-in Transformer
• Wall-Mounted | Solar Charge Controller (40A)
Model: MPPT 40A
Max. Charge Current 40A
System Voltage: 12v/24v/36v/48v | Àmųmà Plus 1.5KVA (12V)
Model name – GA1512A
Capacity (VA) – 1500VA
Input Voltage (DC) – 12V
Nominal Voltage – 220VAC
Voltage Range – 154-265VAC (AC Model); 185-264VAC±3V(UPS Model)
Frequency 50/60Hz (Auto sensing)
Power Factor – 0.8 | Àmųmà Plus 2KVA (12/24V)
Model name – GA2024A
Capacity (VA) – 2000VA
Input Voltage (DC) – 12/24V
Nominal Voltage – 220VAC
Voltage Range – 154-265VAC (AC Model); 185-264VAC±3V(UPS Model)
Frequency 50/60Hz (Auto sensing)
Power Factor – 0.8 | Gamma 6 Hybrid Technical features
MODEL Name – Gamma 6
Model Number – ONY-I-G6-48
Maximum PV Input Power – 6000W
Rated Output Power – 6000W | Àmųmà Plus 3KVA (24V)
Model name – GA3024A
Capacity (VA) – 3000VA
Input Voltage (DC) – 24V
Nominal Voltage – 220VAC
Voltage Range – 154-265VAC (AC Model); 185-264VAC±3V(UPS Model)
Frequency 50/60Hz (Auto sensing)
Power Factor – 0.8 |
Content | Àmųmà Plus 10KVA (48V)
Specification Of Àmųmà Plus 10KVA (48V)
Model name – GA10048A
Capacity (VA) – 10000VA
Input Voltage (DC) – 48V
Nominal Voltage – 220VAC
Voltage Range – 154-265VAC (AC Model); 185-264VAC±3V(UPS Model)
Frequency - 50/60Hz (Auto sensing)
Power Factor – 0.8
Rated Power: 8000W
Voltage: 220VAC
Frequency: 50/60Hz
Waveform: Pure SineWave
Transfer time (AC to DC): <8ms
Transfer time (DC to AC): <8ms
Output Voltage Regulation: ±10%
Bypass Mode: Yes
Save mode: Yes
Efficiency: >98%
Input protection: Circuit breaker
Output protection: Circuit breaker
Battery Type: AGM- Deep Cycle, Gel Up to 500Ah
Charging current: 42A
Low Level disconnect (Selectable): 40V or 42V
PWM (Optional) Controller Voltage: 30VDC – 60VDC
MPPT (Optional) Controller Voltage: 30VDC – 150VDC
Maximum PV Array Power: 3200W
Maximum PV Array Open circuit Voltage: MPPT:150VDC
Maximum Solar Charge current: 100A
Protections: Over load, Over temp, Over charging, Battery low, Battery reverse connect, High AC voltage etc
LCD Indicator Status: AC Input Voltage, AC Input Frequency, PV Voltage, PV Current
Output Voltage, Output Frequency, Battery Voltage, Load current etc.
LED Indicator Status: AC Line in: Green / Inverter: Green / Charging: Yellow / Alarm: Red
Low battery alarm: Audible alarm -5 seconds beeping
Overload alarm: Audible alarm-continuous beeping
Fault: Audible alarm-continuous beeping
Temperature: 0 – 40°C
Humidity -10°C-90°C Non Condensing
Accoustic Noise (db): >55dB
Size L*W*H (mm): 470*335*210MM
Weight: 40
| Solar Charge Controller (40A)
Model: MPPT 40A
Max. Charge Current 40A
System Voltage: 12v/24v/36v/48v
Flexible
Max. PV Voltage (VoC): 150Vdc
Solar Operating Voltage: 20-150Vdc @12V
36-150Vdc @24v
48-150Vdc @36v
64-150Vdc @48v
PV Input Power: 12v: 540w
24v: 1080w
36v: 1620w
48v: 2180w
Operation Temperature -25~60°C | Àmųmà Plus 1.5KVA (12V)
• Support Lithium battery
• Support RS232 for WIFI (optional)
• Pure Sine Wave output
• Powerful Charge Rate Up to 90AMP
• DC Start & Automatic Self-Diagnostic Function
• High Efficiency Design & “Power Saving Mode” to Conserve Energy
• Auto restart when AC in recovering
• Smart battery charger design for optimized battery performance
• Selectable charging current based on applications
• AC input/DC input/Solar input optional priority
• Built-in Transformer
• Wall-Mounted
DESCRIPTION
SPECIFICATIONS
Model name – GA1512A
Capacity (VA) – 1500VA
Input Voltage (DC) – 12V
Nominal Voltage – 220VAC
Voltage Range – 154-265VAC (AC Model); 185-264VAC±3V(UPS Model)
Frequency 50/60Hz (Auto sensing)
Power Factor – 0.8
Rated Power 1200W
Voltage 220VAC
Frequency 50/60Hz
Waveform Pure Sinewave
Transfer time (AC to DC) <8ms
Transfer time (DC to AC) <8ms
Output Voltage Regulation ±10%
Bypass Mode Yes
Save mode Yes
Efficiency >98%
Input protection Circuit breaker
Output protection Circuit breaker
Battery Type AGM- Deep Cycle, Gel Up to 500Ah
Charging current 30A
Low Level disconnect (Selectable) 10V or 10.5V
PWM (Optional) Controller Voltage 15VDC - 30VDC
MPPT (Optional) Controller Voltage 15VDC - 30VDC
Maximum PV Array Power 400W
Maximum PV Array Open circuit Voltage PWM: 50VDC
Maximum Solar Charge current 30A
Protections Over load, Over temp, Ove charging, Battery low, Battery reverse connect, High AC voltage etc
LCD Indicator Status AC Input Voltage, AC Input Frequency, PV Voltage, PV Current
Output Voltage, Output Frequency, Battery Voltage, Load current etc.
LED Indicator Status AC Line in: Green / Inverter: Green / Charging: Yellow / Alarm: Red
Low battery alarm Audible alarm -5 sounds beeping
Overload alarm Audible alarm-continuous beeping
Fault Audible alarm-continuous beeping
Temperature 0 – 40°C
Humidity -10°C-90°C Non Condensing
Accoustic Noise (db) >55dB
Size L*W*H (mm) 325*263*123MM
Weight | Àmųmà Plus 2KVA (12/24V)
• Support Lithium battery
• Support RS232 for WIFI (optional)
• Pure Sine Wave output
• Powerful Charge Rate Up to 90AMP
• DC Start & Automatic Self-Diagnostic Function
• High Efficiency Design & “Power Saving Mode” to Conserve Energy
• Auto restart when AC in recovering
• Smart battery charger design for optimized battery performance
• Selectable charging current based on applications
• AC input/DC input/Solar input optional priority
• Built-in Transformer
• Wall-Mounted
DESCRIPTION
SPECIFICATIONS
Model name – GA2024A
Capacity (VA) – 2000VA
Input Voltage (DC) – 12/24V
Nominal Voltage – 220VAC
Voltage Range – 154-265VAC (AC Model); 185-264VAC±3V(UPS Model)
Frequency 50/60Hz (Auto sensing)
Power Factor – 0.8
Rated Power 1600W
Voltage 220VAC
Frequency 50/60Hz
Waveform Pure Sinewave
Transfer time (AC to DC) <8ms
Transfer time (DC to AC) <8ms
Output Voltage Regulation ±10%
Bypass Mode Yes
Save mode Yes
Efficiency >98%
Input protection Circuit breaker
Output protection Circuit breaker
Battery Type AGM- Deep Cycle, Gel Up to 500Ah
Charging current 20A/30A
Low Level disconnect (Selectable) 20V or 21V
PWM (Optional) Controller Voltage
MPPT (Optional) Controller Voltage 15VDC - 30VDC
Maximum PV Array Power 1600W
Maximum PV Array Open circuit Voltage PWM: 105VDC, MPPT:150VDC
Maximum Solar Charge current 60A
Protections Over load, Over temp, Over charging, Battery low, Battery reverse connect, High AC voltage etc
LCD Indicator Status AC Input Voltage, AC Input Frequency, PV Voltage, PV Current
Output Voltage, Output Frequency, Battery Voltage, Load current etc.
LED Indicator Status AC Line in: Green / Inverter: Green / Charging: Yellow / Alarm: Red
Low battery alarm Audible alarm -5 sounds beeping
Overload alarm Audible alarm-continuous beeping
Fault Audible alarm-continuous beeping
Temperature 0 – 40°C
Humidity -10°C-90°C Non Condensing
Accoustic Noise (db) >55dB
Size L*W*H (mm) 470*335*210MM
Weight 17 | Gamma 6 Hybrid
Technical features
MODEL Name – Gamma 6
Model Number – ONY-I-G6-48
Maximum PV Input Power – 6000W
Rated Output Power – 6000W
Gamma 6 Hybrid
• Pure sine wave output & Dual AC output
• Self-consumption and feed-in to the grid
• Built-in MPPT solar charger
• Programmable supply priority for PV, Battery or Grid
• User-adjustable charging current and voltage
• Programmable multiple operation modes: Grid-tie,off-grid and grid-tie with backup
• Detachable LCD panel
• Built-in Wi-Fi for mobile monitoring (APP is available)
• Supports USB on the go function
• Reserve BMS communication
• Parallel operation up to 9 units
SPECIFICATIONS
GRID TIE OPERATION (AC) / PV INPUT (DC) / HYBRID OPERATION
Power Rate/Nominal DC Voltage/Maximum DC Voltage - 360VDC/500VDC
Start-up Voltage/ Initial Feeding Voltage – 120VDC/150VDC
MPPT Voltage Range – 120VDC~150VDC/430VDC
Number of MPPT Trackers / Max Input Current - 1/27A
GRID TIE OPERATION / GRID OUTPUT (AC) / HYBRID OPERATION
Nominal Output Voltage - 220/230/240VAC
Output Voltage Range - 184 – 264.5 VAC or 195.5 – 253 VAC (Selectable)
Nominal Output Current - 26A
GRID TIE OPERATION / EFFICIENCY
Maximum Conversion Efficiency (DC/AC) - 95%
OFF-GRID OPERATION / AC INPUT / HYBRID OPERATION
AC Startup Voltage / Auto Restart Voltage – 120 - 140VAC / 180VAC
Acceptable Input Voltage Range - 90-280VAC or 170 - 280VAC
Frequency Range - 50Hz / 60Hz (Auto Sensing)
Maximum AC Input Current - 40A
OFF-GRID OPERATION / PV INPUT (DC)
Maximum DC Voltage - 500VDC
MPPT Voltage Range – 120VDC ~ 430VAC
Number of MPPT Trackers / Max Input Current - (1/27A)
OFF-GRID OPERATION / BATTERY MODE OUTPUT (AC)
Battery Mode Output (AC) - 220/230/240VAC
Output Waveform - Pure Sine Wave
Efficiency (DC to AC) - 93%
HYBRID OPERATION / BATTERY MODE OUTPUT
Nominal Output Voltage - 220/230/240VAC
Efficiency (DC to AC) - 93%
HYBRID OPERATION / BATTERY & CHARGER
Maximum DC Voltage - 48V
Maximum Solar Charging Current – 120A
Maximum AC Charging Current – 120A
Maximum Charging Current – 120A
GENERAL / PHYSICAL of Gamma 6 Hybrid
Dimension, D x W x H (mm) – 140 x 295 x 468
Net Weight – 14KG
GENERAL / INTERFACE
Parallel Function – Built in parallel kit up to 9 units
Communication Port – USB/RS-232/WiFi/Dry-Contact
GENERAL / ENVIRONMENT
Humidity – 0~ 90% RH (No Condensing)
Operating Temperature – -10°C to 50°C | Àmųmà Plus 3KVA (24V)
• Support Lithium battery
• Support RS232 for WIFI (optional)
• Pure Sine Wave output
• Powerful Charge Rate Up to 90AMP
• DC Start & Automatic Self-Diagnostic Function
• High Efficiency Design & “Power Saving Mode” to Conserve Energy
• Auto restart when AC in recovering
• Smart battery charger design for optimized battery performance
• Selectable charging current based on applications
• AC input/DC input/Solar input optional priority
• Built-in Transformer
• Wall-Mounted
DESCRIPTION
Specifications of Àmųmà Plus 3KVA (24V)
Model name – GA3024A
Capacity (VA) – 3000VA
Input Voltage (DC) – 24V
Nominal Voltage – 220VAC
Voltage Range – 154-265VAC (AC Model); 185-264VAC±3V(UPS Model)
Frequency 50/60Hz (Auto sensing)
Power Factor – 0.8
Rated Power - 2400W
Voltage - 220VAC
Frequency - 50/60Hz
Waveform Pure Sinewave
Transfer time (AC to DC) <8ms
Transfer time (DC to AC) <8ms
Output Voltage Regulation ±10%
Bypass Mode - Yes
Save mode - Yes
Efficiency >98%
Input protection Circuit breaker
Output protection Circuit breaker
Battery Type AGM- Deep Cycle, Gel Up to 500Ah
Charging current 30A
Low Level disconnect (Selectable) 20V or 21V
PWM (Optional) Controller Voltage
MPPT (Optional) Controller Voltage 15VDC - 30VDC
Maximum PV Array Power 1600W
Maximum PV Array Open circuit Voltage PWM: 105VDC, MPPT:150VDC
Maximum Solar Charge current 60A
Protections Over load, Over temp, Over charging, Battery low, Battery reverse connect, High AC voltage etc
LCD Indicator Status AC Input Voltage, AC Input Frequency, PV Voltage, PV Current
Output Voltage, Output Frequency, Battery Voltage, Load current etc.
LED Indicator Status AC Line in: Green / Inverter: Green / Charging: Yellow / Alarm: Red
Low battery alarm Audible alarm -5 sounds beeping
Overload alarm Audible alarm-continuous beeping
Fault Audible alarm-continuous beeping
Temperature 0 – 40°C
Humidity -10°C-90°C Non Condensing
Accoustic Noise (db) >55dB
Size L*W*H (mm) 470*335*210MM
Weight |
Reviews
There are no reviews yet.