Description | Àmųmà Plus 2KVA (12/24V)
Model name – GA2024A
Capacity (VA) – 2000VA
Input Voltage (DC) – 12/24V
Nominal Voltage – 220VAC
Voltage Range – 154-265VAC (AC Model); 185-264VAC±3V(UPS Model)
Frequency 50/60Hz (Auto sensing)
Power Factor – 0.8 | Àmųmà Plus 10KVA (48V)
• Support Lithium battery
• Support RS232 for WIFI (optional)
• Pure Sine Wave output
• Powerful Charge Rate Up to 90AMP
• DC Start & Automatic Self-Diagnostic Function
• High Efficiency Design & “Power Saving Mode” to Conserve Energy
• Auto restart when AC in recovering
• Smart battery charger design for optimized battery performance
• Selectable charging current based on applications
• AC input/DC input/Solar input optional priority
• Built-in Transformer
• Wall-Mounted | Solar Charge Controller (40A)
Model: MPPT 40A
Max. Charge Current 40A
System Voltage: 12v/24v/36v/48v | Àmųmà Plus 3KVA (24V)
Model name – GA3024A
Capacity (VA) – 3000VA
Input Voltage (DC) – 24V
Nominal Voltage – 220VAC
Voltage Range – 154-265VAC (AC Model); 185-264VAC±3V(UPS Model)
Frequency 50/60Hz (Auto sensing)
Power Factor – 0.8 | Àmųmà Plus 6KVA (24V)
- Model name – GA6024A
- Capacity (VA) – 6000VA
- Input Voltage (DC) – 24V
- Nominal Voltage – 220VAC
- Voltage Range – 154-265VAC (AC Model); 185-264VAC±3V(UPS Model)
- Frequency 50/60Hz (Auto sensing)
- Power Factor – 0.8
| Grovolt Ricco Plus 3.5KVA (24/48V)
* Pure Sine Wave Inverter
* Inbuilt With Transformer which is a strong load ability.
* Wide Charge Current 20-30A
* High-efficiency design & Power saving mode to conserve energy.
* Auto-restart when AC recovering. |
Content | Àmųmà Plus 2KVA (12/24V)
• Support Lithium battery
• Support RS232 for WIFI (optional)
• Pure Sine Wave output
• Powerful Charge Rate Up to 90AMP
• DC Start & Automatic Self-Diagnostic Function
• High Efficiency Design & “Power Saving Mode” to Conserve Energy
• Auto restart when AC in recovering
• Smart battery charger design for optimized battery performance
• Selectable charging current based on applications
• AC input/DC input/Solar input optional priority
• Built-in Transformer
• Wall-Mounted
DESCRIPTION
SPECIFICATIONS
Model name – GA2024A
Capacity (VA) – 2000VA
Input Voltage (DC) – 12/24V
Nominal Voltage – 220VAC
Voltage Range – 154-265VAC (AC Model); 185-264VAC±3V(UPS Model)
Frequency 50/60Hz (Auto sensing)
Power Factor – 0.8
Rated Power 1600W
Voltage 220VAC
Frequency 50/60Hz
Waveform Pure Sinewave
Transfer time (AC to DC) <8ms
Transfer time (DC to AC) <8ms
Output Voltage Regulation ±10%
Bypass Mode Yes
Save mode Yes
Efficiency >98%
Input protection Circuit breaker
Output protection Circuit breaker
Battery Type AGM- Deep Cycle, Gel Up to 500Ah
Charging current 20A/30A
Low Level disconnect (Selectable) 20V or 21V
PWM (Optional) Controller Voltage
MPPT (Optional) Controller Voltage 15VDC - 30VDC
Maximum PV Array Power 1600W
Maximum PV Array Open circuit Voltage PWM: 105VDC, MPPT:150VDC
Maximum Solar Charge current 60A
Protections Over load, Over temp, Over charging, Battery low, Battery reverse connect, High AC voltage etc
LCD Indicator Status AC Input Voltage, AC Input Frequency, PV Voltage, PV Current
Output Voltage, Output Frequency, Battery Voltage, Load current etc.
LED Indicator Status AC Line in: Green / Inverter: Green / Charging: Yellow / Alarm: Red
Low battery alarm Audible alarm -5 sounds beeping
Overload alarm Audible alarm-continuous beeping
Fault Audible alarm-continuous beeping
Temperature 0 – 40°C
Humidity -10°C-90°C Non Condensing
Accoustic Noise (db) >55dB
Size L*W*H (mm) 470*335*210MM
Weight 17 | Àmųmà Plus 10KVA (48V)
Specification Of Àmųmà Plus 10KVA (48V)
Model name – GA10048A
Capacity (VA) – 10000VA
Input Voltage (DC) – 48V
Nominal Voltage – 220VAC
Voltage Range – 154-265VAC (AC Model); 185-264VAC±3V(UPS Model)
Frequency - 50/60Hz (Auto sensing)
Power Factor – 0.8
Rated Power: 8000W
Voltage: 220VAC
Frequency: 50/60Hz
Waveform: Pure SineWave
Transfer time (AC to DC): <8ms
Transfer time (DC to AC): <8ms
Output Voltage Regulation: ±10%
Bypass Mode: Yes
Save mode: Yes
Efficiency: >98%
Input protection: Circuit breaker
Output protection: Circuit breaker
Battery Type: AGM- Deep Cycle, Gel Up to 500Ah
Charging current: 42A
Low Level disconnect (Selectable): 40V or 42V
PWM (Optional) Controller Voltage: 30VDC – 60VDC
MPPT (Optional) Controller Voltage: 30VDC – 150VDC
Maximum PV Array Power: 3200W
Maximum PV Array Open circuit Voltage: MPPT:150VDC
Maximum Solar Charge current: 100A
Protections: Over load, Over temp, Over charging, Battery low, Battery reverse connect, High AC voltage etc
LCD Indicator Status: AC Input Voltage, AC Input Frequency, PV Voltage, PV Current
Output Voltage, Output Frequency, Battery Voltage, Load current etc.
LED Indicator Status: AC Line in: Green / Inverter: Green / Charging: Yellow / Alarm: Red
Low battery alarm: Audible alarm -5 seconds beeping
Overload alarm: Audible alarm-continuous beeping
Fault: Audible alarm-continuous beeping
Temperature: 0 – 40°C
Humidity -10°C-90°C Non Condensing
Accoustic Noise (db): >55dB
Size L*W*H (mm): 470*335*210MM
Weight: 40
| Solar Charge Controller (40A)
Model: MPPT 40A
Max. Charge Current 40A
System Voltage: 12v/24v/36v/48v
Flexible
Max. PV Voltage (VoC): 150Vdc
Solar Operating Voltage: 20-150Vdc @12V
36-150Vdc @24v
48-150Vdc @36v
64-150Vdc @48v
PV Input Power: 12v: 540w
24v: 1080w
36v: 1620w
48v: 2180w
Operation Temperature -25~60°C | Àmųmà Plus 3KVA (24V)
• Support Lithium battery
• Support RS232 for WIFI (optional)
• Pure Sine Wave output
• Powerful Charge Rate Up to 90AMP
• DC Start & Automatic Self-Diagnostic Function
• High Efficiency Design & “Power Saving Mode” to Conserve Energy
• Auto restart when AC in recovering
• Smart battery charger design for optimized battery performance
• Selectable charging current based on applications
• AC input/DC input/Solar input optional priority
• Built-in Transformer
• Wall-Mounted
DESCRIPTION
Specifications of Àmųmà Plus 3KVA (24V)
Model name – GA3024A
Capacity (VA) – 3000VA
Input Voltage (DC) – 24V
Nominal Voltage – 220VAC
Voltage Range – 154-265VAC (AC Model); 185-264VAC±3V(UPS Model)
Frequency 50/60Hz (Auto sensing)
Power Factor – 0.8
Rated Power - 2400W
Voltage - 220VAC
Frequency - 50/60Hz
Waveform Pure Sinewave
Transfer time (AC to DC) <8ms
Transfer time (DC to AC) <8ms
Output Voltage Regulation ±10%
Bypass Mode - Yes
Save mode - Yes
Efficiency >98%
Input protection Circuit breaker
Output protection Circuit breaker
Battery Type AGM- Deep Cycle, Gel Up to 500Ah
Charging current 30A
Low Level disconnect (Selectable) 20V or 21V
PWM (Optional) Controller Voltage
MPPT (Optional) Controller Voltage 15VDC - 30VDC
Maximum PV Array Power 1600W
Maximum PV Array Open circuit Voltage PWM: 105VDC, MPPT:150VDC
Maximum Solar Charge current 60A
Protections Over load, Over temp, Over charging, Battery low, Battery reverse connect, High AC voltage etc
LCD Indicator Status AC Input Voltage, AC Input Frequency, PV Voltage, PV Current
Output Voltage, Output Frequency, Battery Voltage, Load current etc.
LED Indicator Status AC Line in: Green / Inverter: Green / Charging: Yellow / Alarm: Red
Low battery alarm Audible alarm -5 sounds beeping
Overload alarm Audible alarm-continuous beeping
Fault Audible alarm-continuous beeping
Temperature 0 – 40°C
Humidity -10°C-90°C Non Condensing
Accoustic Noise (db) >55dB
Size L*W*H (mm) 470*335*210MM
Weight | Àmųmà Plus 6KVA (24V)
• Support Lithium battery
• Support RS232 for WIFI (optional)
• Pure Sine Wave output
• Powerful Charge Rate Up to 90AMP
• DC Start & Automatic Self-Diagnostic Function
• High Efficiency Design & “Power Saving Mode” to Conserve Energy
• Auto restart when AC in recovering
• Smart battery charger design for optimized battery performance
• Selectable charging current based on applications
• AC input/DC input/Solar input optional priority
• Built-in Transformer
• Wall-Mounted
DESCRIPTION
Specification Of Àmųmà Plus 6KVA (24V)
Model name – GA6024A
Capacity (VA) – 6000VA
Input Voltage (DC) – 24V
Nominal Voltage – 220VAC
Voltage Range – 154-265VAC (AC Model); 185-264VAC±3V(UPS Model)
Frequency 50/60Hz (Auto sensing)
Power Factor – 0.8
Rated Power 4800W
Voltage 220VAC
Frequency 50/60Hz
Waveform Pure Sinewave
Transfer time (AC to DC) <8ms
Transfer time (DC to AC) <8ms
Output Voltage Regulation ±10%
Bypass Mode Yes
Save mode Yes
Efficiency >98%
Input protection Circuit breaker
Output protection Circuit breaker
Battery Type AGM- Deep Cycle, Gel Up to 500Ah
Charging current 60A
Low Level disconnect (Selectable) 20V or 21V
PWM (Optional) Controller Voltage 30VDC - 60VDC
MPPT (Optional) Controller Voltage 30VDC - 60VDC
Maximum PV Array Power 1600W
Maximum PV Array Open circuit Voltage PWM: 150VDC, MPPT:150VDC
Maximum Solar Charge current 100A
Protections Over load, Over temp, Over charging, Battery low, Battery reverse connect, High AC voltage etc
LCD Indicator Status AC Input Voltage, AC Input Frequency, PV Voltage, PV Current
Output Voltage, Output Frequency, Battery Voltage, Load current etc.
LED Indicator Status AC Line in: Green / Inverter: Green / Charging: Yellow / Alarm: Red
Low battery alarm Audible alarm -5 sounds beeping
Overload alarm Audible alarm-continuous beeping
Fault Audible alarm-continuous beeping
Temperature 0 – 40°C
Humidity -10°C-90°C Non Condensing
Accoustic Noise (db) >55dB
Size L*W*H (mm) 470*335*210MM
Weight 29 | Grovolt Ricco Plus 3.5KVA (24/48V)
* Pure Sine Wave Inverter
* Inbuilt With Transformer which is a strong load ability.
* Wide Charge Current 20-30A
* High-efficiency design & Power saving mode to conserve energy.
* Auto-restart when AC recovering.
* Smart battery charger design for optimized battery performance; With bypass /battery reverse protection / 6mill seconds transfer time / surge protection/input & output overload protection
DESCRIPTION
SPECIFICATIONS of Grovolt Ricco Plus 3.5KVA (24/48V)
Model name – RP-3500 AND RP-3548
Input
Capacity – 3500VA
Voltage (DC) – 24/48V
Nominal Voltage – 220VAC/110VAC
Voltage Range – 154-265VAC/77-135VAC
Frequency 50/60Hz (Auto sensing)
OUTPUT
Watt 800W | 1200W | 2000W | 2800W | 4000W | 4800W | 5200W | 6400W | 8000W
Voltage – 220VAC/110VAC
Frequency - 50Hz to 60Hz
Waveform – Pure Sinewave
Transfer time (AC to DC) <8ms
Transfer time (DC to AC) <8ms
Output Voltage Regulation 10%rms
Bypass Mode Yes
Save mode Yes
Efficiency >98%
PROTECTION
Input protection Circuit breaker
Output protection Circuit breaker
BATTERY
BATTERY TYPE AGM- Deep Cycle Gel
Up to 500Ah
Charging current 20/10A |30/15/7A | 48/24/12A | 30/15A | 40/20A | 45/22A | 50/25A | 35A | 50/25/12A
Low level disconnect (10V or 10.5V) × N N means the number of batteries in series
LCD INDICATOR STATUS Input AC/ Output AC
Battery DC, Output Load
Alarm, Fault
Battery Charge Level
Output Frequency
LED INDICATOR STATUS AC Line in: Green
Inverter: Green
Charging: Yellow
Alarm: Red
Grovolt Ricco Plus 3.5KVA (24/48V)
Battery low alarm battery light discharge 11.5V*N; battery load discharge 11.5V*N@load<20%
11V*N@load>50% / 10.5V*N@load>50%
Battery low recovery battery light discharge 11.5V*N; battery load discharge 11.5V*N@load<20%
11.5V*N@load>50% / 11V*N@load>50%
DC low voltage shutdown battery light discharge 11.5V*N; battery load discharge 11.5V*N@load<20%
10.5V*N@load>50% / 10.5V*N@load>50%
DC high Voltage alarm & fault 16V*N
DC high Voltage recovery 15V*N
ALARM
Low battery alarm Audible alarm -1 beeping per second
Overload alarm Audible alarm-continuous beeping
Fault Audible alarm-continuous beeping
ENVIRONMENT
Temperature - (0 - 40)
Humidity - CO-95% Non Condensing
Fault – >55db |
Reviews
There are no reviews yet.